We're running FreeNAS on a Xeon 3.2/4GB RAM/6TB (12X500GB 7200RPM SATA drives). We're running this for collecting off-site backups of customer data, so throughput is not an issue (limited by Internet bandwidth). My cost (a year ago) was $2K. I WOULD NOT use this in a home automation system where you are likely streaming audio/video, and possibly to multiple zones at the same time. This will not be fast enough.
There is a very real problem finding higher performance storage servers for home automation projects at the home automation project budget level. At least for projects sub $150K. However, I might use this box to record Asterisk calls :) -----Original Message----- From: Bruce Nik [mailto:[EMAIL PROTECTED] Sent: December-09-08 11:23 PM To: asterisk Mailing Subject: [on-asterisk] FreeNAS Hi, To those who have used FreeNAS before, what is the minimum hardware requirement to run RAID 1+0 for 6TB (6 X 1TB HDDs)? The server could be a rack or full case. There are no specific requirements for the system other than maybe Gigabit ethernet port. Looking for ready ready made CHEAP systems. Something local and walk-in. Or suggestinos fro motherboard type, amount of RAM, and CPU speed. Really CHEAP being the keyword. Note: For those who followed my posts before this is not for that project. This server will act as storage to Control4 home automation system. Thanks, Bruce _________________________________________________________________ --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
