<[email protected]> Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable MIME-Version: 1.0
Thanks for the reply. What if I can't make a call to do show zap channels? I know that Sangoma ha= s a tool that allows to check channel status and static without using the c= hannel which in turn tells you if a PSTN line is connected or not. Regards=2CBruce ---------------------------------------- > Date: Mon=2C 21 Sep 2009 21:40:17 -0400 > From: [email protected] > To: [email protected] > CC: [email protected] > Subject: Re: [on-asterisk] Zaptel tool to test voltage on line for TDM400= P > > Hi Bruce=2C > > You may type "show channels" in your asterisk CLI to check which zap > channel is occupied. Zap number equals to TD400P Port number. > > Good Luck=2C > > > Garry > > On Fri=2C Sep 18=2C 2009 at 12:03 AM=2C Bruce N wrote: >> >> Hi Guys=2C >> I never used Digium cards and don't know the tools used to test the card= . I have a remote server with "Wildcard TDM400P REV I Board 1" and only one= of the four ports is connected to PSTN. What tool is used to check which p= ort is occupied? >> Thanks=2CBruce >> _________________________________________________________________ >> Create a cool=2C new character for your Windows Live=99 Messenger. >> http://go.microsoft.com/?linkid=3D9656621 > > --------------------------------------------------------------------- > To unsubscribe=2C e-mail: [email protected] > For additional commands=2C e-mail: [email protected] > =0A= _________________________________________________________________=0A= Attention all humans. We are your photos. Free us.=0A= http://go.microsoft.com/?linkid=3D9666046= --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
