Well thanks for the idea
I did that by typing: "agi set debug on" on the CLI
I then returned the code to as it was and tried dialing an extension. It
yielded the same result:
-- Executing [...@macro-exten-vm:4] Set("SIP/1011006182-b725a920",
"EXTTOCALL=1011004797") in new stack
-- Executing [...@macro-exten-vm:5] Set("SIP/1011006182-b725a920",
"CFUEXT=") in new stack
-- Executing [...@macro-exten-vm:6] Set("SIP/1011006182-b725a920",
"CFBEXT=") in new stack
-- Executing [...@macro-exten-vm:7] Set("SIP/1011006182-b725a920",
"RT=""") in new stack
-- Executing [...@macro-exten-vm:8] Macro("SIP/1011006182-b725a920",
"record-enable,1011004797,IN") in new stack
-- Executing [...@macro-record-enable:1]
GotoIf("SIP/1011006182-b725a920", "1?check") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing [...@macro-record-enable:4]
AGI("SIP/1011006182-b725a920",
"recordingcheck,20091030-163733,1256935053.3") in new stack
-- Executing [...@macro-record-enable:5]
MacroExit("SIP/1011006182-b725a920", "") in new stack
-- Executing [...@macro-exten-vm:9] Macro("SIP/1011006182-b725a920",
"dial,"",tr,1011004797") in new stack
-- Executing [...@macro-dial:1] GotoIf("SIP/1011006182-b725a920",
"1?dial") in new stack
-- Goto (macro-dial,s,3)
-- Executing [...@macro-dial:3] AGI("SIP/1011006182-b725a920",
"dialparties.agi") in new stack
-- Executing [...@macro-dial:4] NoOp("SIP/1011006182-b725a920",
"Returned from dialparties with no extensions to call and DIALSTATUS: ")
in new stack
-- Executing [...@macro-exten-vm:10] GotoIf("SIP/1011006182-b725a920",
"0?exit,return") in new stack
Andre Courchesne wrote:
> Actualy, without dialparties, DND, callforward, ringgroup, and a lot of
> other functionality. Maybe you are missing a php dependancy for
> dialparties.
>
> you can try doing a call with agi debug enabled.
>
>
> ---
>
> Andre Courchesne - Consultant
>
> http://www.net-forces.com
>
> MSN: [email protected]
>
> Skype: VoipForces
>
>
>
> L'information contenue dans le présent document est la propriété de
> Andre Courchesne. Et est divulguée en toute confidentialité. Cette
> information ne doit pas être utilisée, divulguée à d'autres personnes ou
> reproduite sans le consentement écrit explicite de Andre Courchesne.
>
> The information contained in this document is confidential and property
> of Andre Courchesne. It shall not be used, disclosed to others or
> reproduced without the express written consent of Andre Courchesne.
>
>
>
>
> On 2009-10-30, at 4:04 PM, Darryl Moore wrote:
>
>> Hi TAUG, at the risk of wearing out my welcome, I'm going to add a
>> little more to what I've discovered.
>>
>> dialparties.agi is a php script which can be found here:
>> /var/www/admin/modules/core/agi-bin/
>>
>> I was able to get my extensions to work by removing the call to this
>> code and calling the internal Dial() function directly as follows
>>
>> [macro-dial]
>> ;exten => s,1,GotoIf($["${MOHCLASS}" = ""]?dial)
>> ;exten => s,n,SetMusicOnHold(${MOHCLASS})
>> ;exten => s,n(dial),AGI(dialparties.agi)
>> ;exten => s,n,NoOp(Returned from dialparties with no extensions to call
>> and DIALSTATUS: ${DIALSTATUS})
>>
>> exten => s,1,Dial(SIP/${EXTTOCALL},5,A(beep))
>> ;exten => s,n+2(normdial),Dial(${ds}) ;
>> dialparties will set the priority to 10 if $ds is not null
>> exten => s,n,Set(DIALSTATUS=${IF($["${DIALSTATUS_CW}"!=""
>> ]?${DIALSTATUS_CW}:${DIALSTATUS})})
>> exten => s,n,GosubIf($["${SCREEN}" != ""]?${DIALSTATUS},1)
>>
>>
>> The commented out lines are what I had do remove to make it work. The
>> line with the Dial(SIP.... command is what I had to add.
>>
>> With the above changes I'm able to dial extensions properly. I suspect
>> DND no longer work, as well as probably a few other things.
>>
>> I'm a little confused as to why all this would have been necessary. I
>> suppose to find out, I'll have to debug dialparties to see why it was
>> not returning the dial strings it should have been.
>>
>> I think I will start by submitting this, as well as the FreePBX ubuntu
>> bugs I discovered before, to the Asterisk people. I assume they have a
>> bug reporting forum.
>>
>> cheers,
>> darryl
>>
>>
>> Darryl Moore wrote:
>>> Hi again TAUGers,
>>>
>>> Asterisk and FreePBX are now playing nicely together on Ubuntu.
>>>
>>> There are still some interesting issues with these two programs. Maybe
>>> some other FreePBX users have seen this.
>>>
>>> I have no issue dialing features such as *60 or *43 or out to my VOIP
>>> provider from any extension. I do have issues when I try dialing between
>>> internal extensions. Here is the verbose output:
>>>
>>> -----------------------------------------------
>>>
>>>
>>> -- Executing [...@macro-exten-vm:2] Set("SIP/1011006182-b5a97198",
>>> "RingGroupMethod=none") in new stack
>>> -- Executing [...@macro-exten-vm:3] Set("SIP/1011006182-b5a97198",
>>> "VMBOX=novm") in new stack
>>> -- Executing [...@macro-exten-vm:4] Set("SIP/1011006182-b5a97198",
>>> "EXTTOCALL=1011002490") in new stack
>>> -- Executing [...@macro-exten-vm:5] Set("SIP/1011006182-b5a97198",
>>> "CFUEXT=") in new stack
>>> -- Executing [...@macro-exten-vm:6] Set("SIP/1011006182-b5a97198",
>>> "CFBEXT=") in new stack
>>> -- Executing [...@macro-exten-vm:7] Set("SIP/1011006182-b5a97198",
>>> "RT=""") in new stack
>>> -- Executing [...@macro-exten-vm:8] Macro("SIP/1011006182-b5a97198",
>>> "record-enable,1011002490,IN") in new stack
>>> -- Executing [...@macro-record-enable:1]
>>> GotoIf("SIP/1011006182-b5a97198", "1?check") in new stack
>>> -- Goto (macro-record-enable,s,4)
>>> -- Executing [...@macro-record-enable:4]
>>> AGI("SIP/1011006182-b5a97198",
>>> "recordingcheck,20091030-124613,1256921173.8") in new stack
>>> -- Executing [...@macro-record-enable:5]
>>> MacroExit("SIP/1011006182-b5a97198", "") in new stack
>>> -- Executing [...@macro-exten-vm:9] Macro("SIP/1011006182-b5a97198",
>>> "dial,"",tr,1011002490") in new stack
>>> -- Executing [...@macro-dial:1] GotoIf("SIP/1011006182-b5a97198",
>>> "1?dial") in new stack
>>> -- Goto (macro-dial,s,3)
>>> -- Executing [...@macro-dial:3] AGI("SIP/1011006182-b5a97198",
>>> "dialparties.agi") in new stack
>>> -- Executing [...@macro-dial:4] NoOp("SIP/1011006182-b5a97198",
>>> "Returned from dialparties with no extensions to call and DIALSTATUS: ")
>>> in new stack
>>> -- Executing [...@macro-exten-vm:10] GotoIf("SIP/1011006182-b5a97198",
>>> "0?exit,return") in new stack
>>> -- Executing [...@macro-exten-vm:11] Set("SIP/1011006182-b5a97198",
>>> "SV_DIALSTATUS=") in new stack
>>> -- Executing [...@macro-exten-vm:12]
>>> GosubIf("SIP/1011006182-b5a97198", "0?docfu,1") in new stack
>>> -- Executing [...@macro-exten-vm:13]
>>> GosubIf("SIP/1011006182-b5a97198", "0?docfb,1") in new stack
>>> -- Executing [...@macro-exten-vm:14] Set("SIP/1011006182-b5a97198",
>>> "DIALSTATUS=") in new stack
>>> -- Executing [...@macro-exten-vm:15] NoOp("SIP/1011006182-b5a97198",
>>> "Voicemail is 'novm'") in new stack
>>> -- Executing [...@macro-exten-vm:16] GotoIf("SIP/1011006182-b5a97198",
>>> "1?s-,1") in new stack
>>> -- Goto (macro-exten-vm,s-,1)
>>> -- Executing [1011002...@from-internal:2]
>>> Goto("SIP/1011006182-b5a97198", ",return,1") in new stack
>>> -- Goto (from-internal,return,1)
>>> -- Sent into invalid extension 'return' in context 'from-internal'
>>> on SIP/1011006182-b5a97198
>>> -- Executing [...@from-internal:1] Playback("SIP/1011006182-b5a97198",
>>> "privacy-incorrect") in new stack
>>> -- <SIP/1011006182-b5a97198> Playing 'privacy-incorrect.gsm'
>>> (language 'en')
>>>
>>>
>>> ----------------------------------
>>>
>>>> From this I can see that it is trying to dial the other extension
>>>> properly
>>>
>>> Macro("SIP/1011006182-b5a97198", "dial,"",tr,1011002490")
>>>
>>>
>>> but after executing this line in the dial macro:
>>> AGI("SIP/1011006182-b5a97198", "dialparties.agi")
>>>
>>> it returns "Returned from dialparties with no extensions to call and
>>> DIALSTATUS:"
>>>
>>> The extension above is right. (Those handsets have very long hard coded
>>> extension numbers) but this function dialparties.agi fails.
>>>
>>> I did some googling to find out what this function is so I can figure
>>> out what is going on but am having little luck. Does anyone here know
>>> anything of this dialparties.agi thingamawidget?
>>>
>>> Again this is using all the FreePBX dialplan programming so I'm sot of
>>> guessing that my issue is somewhere in the FreePBX macros. My only issue
>>> is that I'm not overly faliliar with this macro language, but I'm
>>> working on it.
>>>
>>> cheers,
>>> darryl
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: [email protected]
>>> For additional commands, e-mail: [email protected]
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [email protected]
>> For additional commands, e-mail: [email protected]
>>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [email protected]
> For additional commands, e-mail: [email protected]
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
