Hi Guys,
An 8 channel Astribank is connected to Trixbox 2.8 and I ran
freepbx-module-zapauto but I get the following when running these commands and
can't make calls out:
[Trixbox]# dahdi_genconf xpporder
/usr/sbin/dahdi_genconf: warning - OLD DRIVER: missing
'/sys/bus/xpds/devices/00:0:0/timing_priority'. Fall back to /proc
pbx*CLI> dahdi show channels
Chan Extension Context Language MOH Interpret Blocked
State
pseudo default default
In Service
1 from-pstn default
In Service
2 from-pstn default
In Service
3 from-pstn default
In Service
4 from-pstn default
In Service
5 from-pstn default
In Service
6 from-pstn default
In Service
7 from-pstn default
In Service
8 from-pstn default
In Service
pbx*CLI> dahdi show status
Description Alarms IRQ bpviol CRC4 Fra Codi
Options LBO
Xorcom XPD #00/00: FXO OK 0 0 0 CAS Unk
YEL 0 db (CSU)/0-133 feet (DSX-1)
pbx*CLI> dahdi show regdump 1
Unable to get registers on channel 1
Unable to get stats on channel 1
[Trixbox]# dahdi_hardware -v
/usr/sbin/dahdi_hardware: warning - OLD DRIVER: missing
'/sys/bus/xpds/devices/00:0:0/timing_priority'. Fall back to /proc
usb:002/002 xpp_usb+ e4e4:1162 Astribank-modular FPGA-firmware
LABEL=[usb:X1044207] connect...@usb-0000:00:1d.7-4
XBUS-00/XPD-00: FXO (8) Span 1 DAHDI-SYNC
Note: This Astribank is deployed in United Arab Emirates and I am not sure what
the line type is in terms of Ground or Loop start and wondering if that makes a
difference with the Astribank and the fact that it can't how the voltage using
"show regdump"
And I am definitly not sure what that warning of OLD DRIVER is about. Any help
is appreciated.
Thanks,
Bruce
_________________________________________________________________
Turn down-time into play-time with Messenger games
http://go.microsoft.com/?linkid=9734385
