Thanks for that. Yes, I am pushing and it makes it available only to Server B and not to it's DHCPd clients which exist on Eth1. I think the push only helps Server A and Server B to ping each other and not the other networks they may have contact with. I have a pastebin of the whole route here:http://pastebin.com/98JhraeJ Basically anyone on the dhcpd 10.0.0.0/24 can't ping the 172.16.0.1 which is the OpenVPN server. But, both OpenVPN server and client server can ping each other.
-Bruce Date: Tue, 21 Sep 2010 15:25:24 -0400 From: [email protected] To: [email protected] Subject: Re: [on-asterisk] OpenVPN Gurus! How to forward all traffic from eth1 to tun0? Bruce, On your client (Server B) are you pushing the route in your config ? route 172.15.0.0 255.255.255.0 push "route 172.15.0.0 255.255.255.0" Mike On 09/21/2010 1:57 PM, Bruce N wrote: Hi Everyone, I know this is way off-topic of the list but it does involve getting Asterisk service up and running :-) In nutshell: I need to SIP/UDP traffic of eth1 (dhcpd server) traffic to tun0 (openvpn tunnel) without sending the dhcpd requests to tun0. In detail: I have two servers: Server A running Asterisk and OpenVPN Server. Server B running DHCPd and has two NIC cards. Eth0 is the WAN to ISP. Eth1 is the NIC that feeds the Switch with DHCPd IPs to endpoint SIP phones. Server A and Server B are miles and miles away from each and are connected to the internet either via Eht0 or Vnet. OpenVPN on Server A is set to IP range 172.15.0.0/24 so Server A and B can ping each other in that range with 172.15.0.1 assigned to Server A. Server B is connected to Server A as an OpenVPN client. I can ping Server A from Server B when doing: ping 172.15.0.1 However, any endpoints (SIP phones) that have obtained IP from Server B DHCPd can not ping 172.15.0.1. Network 172.15.0.1 is simple unreachable to them. My thought was that upon succesful establish of the openvpn connection the routes will populate properly but it seems that any requests to 172.15.0.1 hit eth0 which is of course wrong. I tried adding routes and I got SIODDART Here is what I need to accomplish: Run a DHCPd service on Server B (which has two NIC cards) and feed IPs to SIP phones and endpoint Create a tunnel between Note: I can't do: push "redirect-gateway def1" because it will make Server B unreachable and Enpoint A points to Server A for DHCP packets which is wrong. Thanks, -- Mike Ashton Quality Track International Work: +1 647 724 3500 x251 Cell: +1 416 527 4995 QTI CONFIDENTIAL AND PROPRIETARY INFORMATION The contents of this material are confidential and proprietary to Quality Track International, Inc. and may not be reproduced, disclosed, distributed or used without the express permission of an authorized representative of QTI. Use for any purpose or in any manner other than that expressly authorized is prohibited. If you have received this communication in error, please immediately delete it and all copies, and promptly notify the sender. --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
