Nabeel, I want to say thank you very much - this solution worked perfectly for me! If anyone else is going to reference this, be sure to add exten = in front of internal and external!
Thanks all! Jason ________________________________ From: Nabeel Jafferali <[email protected]> To: Asterisk Users Group <[email protected]> Sent: Mon, October 25, 2010 1:51:58 PM Subject: RE: [on-asterisk] Call Hunting / Ring Group To be more specific: Instead of: 100,1,Dial(SIP/101&SIP/provider/4169671111,,M(confirm)) use: 100,1,Dial(LOCAL/inter...@me&LOCAL/exte...@me) [me] internal,1,Dial(SIP/101) external,1,Dial(SIP/provider/4169671111,,M(confirm)) -- Nabeel Jafferali X2 Networks Inc. -----Original Message----- From: Nabeel Jafferali [mailto:[email protected]] Sent: October-25-10 1:44 PM To: 'Asterisk Users Group' Subject: RE: [on-asterisk] Call Hunting / Ring Group Split your dial strings into two separate ones, then call both using the LOCAL channel. -- Nabeel Jafferali X2 Networks Inc. -----Original Message----- From: Jason Rose [mailto:[email protected]] Sent: October-25-10 12:43 PM To: Asterisk Users Group Subject: [on-asterisk] Call Hunting / Ring Group Hey all, I currently have my system setup to ring one DID out to 3 extensions and a cell phone... the problem I have is if the cell is off or doesnt answer, it goes direct to the cellphones voicemail. Philip gave me a great little macro to ensure the user presses "1" to accept the call which so far has been flawless, but is executed via the following: "Dial(SIP/2001&SIP/2000&SIP/14169537...@voipms-ca2,30,riM(confirmcall))"... my issue now is that even my internal extensions must press 1 to confirm the call... Is there any way to re-write the dial string over multiple lines that get executed at the same time - then I can have my internals dial without the attached macro confirm call? Thanks, Jason --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
