Ralph, de onde surgiu a sugerencia de retirar o mod. de Echo Canc.??? Estranho... as configs. parecem estar todas OK. Será algum conflito com o seu mainboard? Vc. chegou a falar com o pessoal da Digium? Pagar pelo modulo e não poder usar é ruim hein... Se vc. estiver usando o samples do Asterisk vc. terá o ramal 500 para se conectar com eles... Senão adiciona isso no seu extensions.conf e liga lá... o suporte gratuito e direto da fonte... tenha em mãos os dados do seu servidor como IP Address e Root password... eles se conectam e revisam... :) ; ; Create an extension, 500, for dialing the ; Asterisk demo. ; exten => 500,1,Playback(demo-abouttotry); Let them know what's going on exten => 500,n,Dial(IAX2/guest em misery.digium.com/s em default) ; Call the Asterisk demo exten => 500,n,Playback(demo-nogo) ; Couldn't connect to the demo site
Abraços, FHV >From: "Ralph Liebessohn" <ralphliebessohn em gmail.com> >Reply-To: asteriskbrasil em listas.asteriskbrasil.org >To: asteriskbrasil em listas.asteriskbrasil.org >Subject: Re: [AsteriskBrasil] digium card não funciona >Date: Mon, 14 Aug 2006 21:01:24 +0000 > >On 8/14/06, Ralph Liebessohn <ralphliebessohn em gmail.com> wrote: >> >>On 8/14/06, Fabio Vasco <fabiohvgomes em hotmail.com> wrote: >> > >> > Ralph, >> > /etc/zaptel.conf e /etc/asterisk/zapata.conf >> > zttool >> > lspci -v >> > Deixa a gente ver isso... >> > Que Linux vc. está usando? >> > Abraços, >> > FHV >> > >> > >From: "Ralph Liebessohn" < ralphliebessohn em gmail.com> >> > >Reply-To: asteriskbrasil em listas.asteriskbrasil.org >> > >To: asteriskbrasil em listas.asteriskbrasil.org >> > >Subject: [AsteriskBrasil] digium card não funciona >> > >Date: Fri, 11 Aug 2006 16:50:28 +0000 >> > > >> > >boa tarde, >> > > >> > > >> > >pessoal, estou com um probleminha aqui com uma placa da digium. >> > >Inicialmente comecei com o asterisk em um computador comum sempron com >> > >placa >> > >mãe pcchips e coloquei pra funcionar uma TE406P. Até ai tudo lindo. >> > >Agora colocando o asterisk pra rodar num P4 Dual com placa mãe intel >> > >(d101ggc) tudo aparentemente funciona, o asterisk compila, roda, liga >> > de >> > >sip >> > >pra sip, os modulos zaptel compilam, carregam, configuram, mas na hora >> > de >> > >ligar mesmo PAM ! >> > >Recebo isso. >> > > >> > >Connected to Asterisk 1.2.7.1 currently running on astk (pid = 4174) >> > >Verbosity is at least 99 >> > >Core debug is at least 99 >> > > -- Executing Dial("SIP/12347-1574", "ZAP/g1/21226551") in new >>stack >> > >> > > -- Requested transfer capability: 0x00 - SPEECH >> > > -- Called g1/21226551 >> > > == Primary D-Channel on span 1 down >> > >Aug 11 12:05:11 WARNING[4219]: chan_zap.c:2298 pri_find_dchan: No >> > >D-channels >> > >available! Using Primary channel 16 as D-channel anyway! >> > > -- Hungup 'Zap/1-1' >> > > == Everyone is busy/congested at this time (1:0/0/1) >> > > -- Executing Hangup("SIP/12347-1574", "") in new stack >> > > == Primary D-Channel on span 1 down >> > >Aug 11 12:05:14 WARNING[4219]: chan_zap.c:2298 pri_find_dchan: No >> > >D-channels >> > >available! Using Primary channel 16 as D-channel anyway! >> > > >> > >Saída /var/log/asterisk/full: >> > >Aug 11 11:53:30 DEBUG[4323] chan_sip.c: Allocating new SIP dialog for >> > >ff3e5bab-e0089797 em 192.168.11.192 - INVITE (With RTP) >> > >Aug 11 11:53:30 DEBUG[4323] chan_sip.c: **** Received INVITE (5) - >> > Command >> > >in SIP INVITE >> > >Aug 11 11:53:30 DEBUG[4323] chan_sip.c: * SIP extension value: 0 for >> > call >> > >ff3e5bab-e0089797 em 192.168.11.192 >> > >Aug 11 11:53:30 DEBUG[4323] chan_sip.c: Setting NAT on RTP to 524288 >> > >Aug 11 11:53:30 DEBUG[4323] chan_sip.c: = Found Their Call ID: >> > >ff3e5bab-e0089797 em 192.168.11.192 Their Tag 53fbac9bdac9fb67o1 >> > >Our tag: as0681a10d >> > >Aug 11 11:53:30 DEBUG[4323] chan_sip.c: **** Received ACK (6) - >>Command >> > in >> > >SIP ACK >> > >Aug 11 11:53:30 DEBUG[4323] chan_sip.c: Stopping retransmission on ' >> > > ff3e5bab-e0089797 em 192.168.11.192' of Response 101: Match >> > >Found >> > >Aug 11 11:53:31 DEBUG[4323] chan_sip.c: = Found Their Call ID: >> > >ff3e5bab-e0089797 em 192.168.11.192 Their Tag 53fbac9bdac9fb67o1 >> > >Our tag: as0681a10d >> > >Aug 11 11:53:31 DEBUG[4323] chan_sip.c: **** Received INVITE (5) - >> > Command >> > >in SIP INVITE >> > >Aug 11 11:53:31 DEBUG[4323] chan_sip.c: * SIP extension value: 0 for >> > call >> > >ff3e5bab-e0089797 em 192.168.11.192 >> > >Aug 11 11:53:31 DEBUG[4323] chan_sip.c: Setting NAT on RTP to 524288 >> > >Aug 11 11:53:31 DEBUG[4323] chan_sip.c: Checking SIP call limits for >> > device >> > >12347 >> > >Aug 11 11:53:31 DEBUG[4323] chan_sip.c: Updating call counter for >> > incoming >> > >call >> > >Aug 11 11:53:31 DEBUG[4323] chan_sip.c: build_route: Contact hop: >> > Linksys 2 >> > ><sip:12347 em 192.168.11.192 :5061> >> > >Aug 11 11:53:31 DEBUG[4315] chan_sip.c: Checking device state for peer >> > >12347 >> > >Aug 11 11:53:31 DEBUG[4315] devicestate.c: Changing state for >>SIP/12347 >> > - >> > >state 2 (In use) >> > >Aug 11 11:53:31 DEBUG[4610] pbx.c: Launching 'Dial' >> > >Aug 11 11:53:31 VERBOSE[4610] logger.c: -- Executing >> > >Dial("SIP/12347-d99a", "ZAP/g1/21226551") in new stack >> > >Aug 11 11:53:31 DEBUG[4610] chan_zap.c: Using channel 1 >> > >Aug 11 11:53:31 DEBUG[4610] channel.c: Not copying variable >> > >STACK-default-21226551-1. >> > >Aug 11 11:53:31 DEBUG[4610] channel.c: Not copying variable SIPCALLID. >> > >Aug 11 11:53:31 DEBUG[4610] channel.c : Not copying variable >> > SIPUSERAGENT. >> > >Aug 11 11:53:31 DEBUG[4610] channel.c: Not copying variable SIPDOMAIN. >> > >Aug 11 11:53:31 DEBUG[4610] channel.c: Not copying variable SIPURI. >> > >Aug 11 11:53:31 VERBOSE[4610] logger.c: -- Requested transfer >> > >capability: 0x00 - SPEECH >> > >Aug 11 11:53:31 VERBOSE[4610] logger.c: -- Called g1/21226551 >> > >Aug 11 11:53:31 DEBUG[4610] channel.c: Set channel Zap/1-1 to read >> > format >> > >slin >> > >Aug 11 11:53:31 DEBUG[4610] channel.c: Set channel SIP/12347-d99a to >> > write >> > >format slin >> > >Aug 11 11:53:31 DEBUG[4610] channel.c: Set channel SIP/12347-d99a to >> > read >> > >format slin >> > >Aug 11 11:53:31 DEBUG[4610] channel.c: Set channel Zap/1-1 to write >> > format >> > >slin >> > >Aug 11 11:53:31 DEBUG[4611] app_queue.c: Device 'SIP/12347' changed to >> > >state >> > >'2' (In use) >> > >Aug 11 11:53:31 DEBUG[4315] devicestate.c: Changing state for Zap/1 - >> > state >> > >2 (In use) >> > >Aug 11 11:53:31 DEBUG[4315] devicestate.c: Changing state for Zap/1 - >> > state >> > >2 (In use) >> > >Aug 11 11:53:31 DEBUG[4612] app_queue.c: Device 'Zap/1' changed to >> > state >> > >'2' >> > >(In use) >> > >Aug 11 11:53:31 DEBUG[4613] app_queue.c: Device 'Zap/1' changed to >> > state >> > >'2' >> > >(In use) >> > >Aug 11 11:53:31 DEBUG[4610] rtp.c: Ooh, format changed from unknown to >> > ulaw >> > >Aug 11 11:53:34 VERBOSE[4364] logger.c: == Primary D-Channel on span >> > 1 >> > >down >> > >Aug 11 11:53:34 WARNING[4364] chan_zap.c: No D-channels >> > available! Using >> > >Primary channel 16 as D-channel anyway! >> > >Aug 11 11:53:34 DEBUG[4610] channel.c : Hanging up channel 'Zap/1-1' >> > >Aug 11 11:53:34 DEBUG[4610] chan_zap.c: zt_hangup(Zap/1-1) >> > >Aug 11 11:53:34 DEBUG[4610] chan_zap.c: Set option AUDIO MODE, value: >> > ON(1) >> > >on Zap/1-1 >> > >Aug 11 11:53:34 DEBUG[4610] chan_zap.c: Hangup: channel: 1 index = 0, >> > >normal >> > >= 22, callwait = -1, thirdcall = -1 >> > >Aug 11 11:53:34 DEBUG[4610] chan_zap.c: disabled echo cancellation on >> > >channel 1 >> > >Aug 11 11:53:34 DEBUG[4610] chan_zap.c: Set option TDD MODE, value: >> > OFF(0) >> > >on Zap/1-1 >> > >Aug 11 11:53:34 DEBUG[4610] chan_zap.c: Updated conferencing on 1, >>with >> > 0 >> > >conference users >> > >Aug 11 11:53:34 DEBUG[4610] chan_zap.c: Set option AUDIO MODE, value: >> > >OFF(0) >> > >on Zap/1-1 >> > >Aug 11 11:53:34 DEBUG[4610] chan_zap.c: disabled echo cancellation on >> > >channel 1 >> > >Aug 11 11:53:34 VERBOSE[4610] logger.c: -- Hungup 'Zap/1-1' >> > >Aug 11 11:53:34 VERBOSE[4610] logger.c: == Everyone is >>busy/congested >> > at >> > >this time (1:0/0/1) >> > >Aug 11 11:53:34 DEBUG[4610] app_dial.c: Exiting with >> > >DIALSTATUS=CHANUNAVAIL. >> > >Aug 11 11:53:34 DEBUG[4610] pbx.c: Launching 'Hangup' >> > >Aug 11 11:53:34 VERBOSE[4610] logger.c : -- Executing >> > >Hangup("SIP/12347-d99a", "") in new stack >> > >Aug 11 11:53:34 DEBUG[4610] pbx.c: Spawn extension >>(default,21226551,2) >> > >exited non-zero on 'SIP/12347-d99a' >> > >Aug 11 11:53:34 DEBUG[4315] devicestate.c: Changing state for Zap/1 - >> > state >> > >0 (Unknown) >> > >Aug 11 11:53:34 DEBUG[4614] app_queue.c: Device 'Zap/1' changed to >> > state >> > >'0' >> > >(Unknown) >> > >Aug 11 11:53:34 DEBUG[4610] cdr_pgsql.c: cdr_pgsql: inserting a CDR >> > record. >> > >Aug 11 11:53:34 DEBUG[4610] cdr_pgsql.c: cdr_pgsql: SQL command >> > executed: >> > >INSERT INTO cdr (calldate,clid,src,dst,dcontext,ch >> > >annel,dstchannel,lastapp,lastdata,duration,billsec >> > ,disposition,amaflags,accountcode,uniqueid,userfield) >> > >VALUES ('2006-08-11 1 >> > >1:53:31','"Linksys 2" <12347>','12347','21226551','default', >> > >'SIP/12347-d99a','Zap/1-1','Hangup','',3,0,'NO ANSWER',2,'12347' >> > >,'1155308011.4','') >> > >Aug 11 11:53:34 DEBUG[4610] pbx.c: Function result is '"Linksys 2" >> > <12347>' >> > >Aug 11 11:53:34 DEBUG[4610] pbx.c: Function result is '12347' >> > >Aug 11 11:53:34 DEBUG[4610] pbx.c: Function result is '21226551' >> > >Aug 11 11:53:34 DEBUG[4610] pbx.c: Function result is 'default' >> > >Aug 11 11:53:34 DEBUG[4610] pbx.c: Function result is 'SIP/12347-d99a' >> > >Aug 11 11:53:34 DEBUG[4610] pbx.c: Function result is 'Zap/1-1' >> > >Aug 11 11:53:34 DEBUG[4610] pbx.c : Function result is 'Hangup' >> > >Aug 11 11:53:34 DEBUG[4610] pbx.c: Function result is '(null)' >> > >Aug 11 11:53:34 DEBUG[4610] pbx.c: Function result is '2006-08-11 >> > 11:53:31' >> > >Aug 11 11:53:34 DEBUG[4610] pbx.c : Function result is '(null)' >> > >Aug 11 11:53:34 DEBUG[4610] pbx.c: Function result is '2006-08-11 >> > 11:53:34' >> > >Aug 11 11:53:34 DEBUG[4610] pbx.c: Function result is '3' >> > >Aug 11 11:53:34 DEBUG[4610] pbx.c: Function result is '0' >> > >Aug 11 11:53:34 DEBUG[4610] pbx.c: Function result is 'NO ANSWER' >> > >Aug 11 11:53:34 DEBUG[4610] pbx.c: Function result is 'BILLING' >> > >Aug 11 11:53:34 DEBUG[4610] pbx.c: Function result is '12347' >> > >Aug 11 11:53:34 DEBUG[4610] pbx.c: Function result is '1155308011.4' >> > >Aug 11 11:53:34 DEBUG[4610] pbx.c: Function result is '(null)' >> > >Aug 11 11:53:34 DEBUG[4610] channel.c: Hanging up channel >> > 'SIP/12347-d99a' >> > >Aug 11 11:53:34 DEBUG[4610] chan_sip.c: Hangup call SIP/12347-d99a, >>SIP >> > >> > >callid ff3e5bab-e0089797 em 192.168.11.192) >> > >Aug 11 11:53:34 DEBUG[4610] chan_sip.c: update_call_counter(12347) - >> > >decrement call limit counter >> > >Aug 11 11:53:34 DEBUG[4610] chan_sip.c: Updating call counter for >> > incoming >> > >call >> > >Aug 11 11:53:34 DEBUG[4610] chan_sip.c: AST hangup cause 16 (no match >> > found >> > >in SIP) >> > >Aug 11 11:53:34 DEBUG[4315] chan_sip.c: Checking device state for peer >> > >12347 >> > >Aug 11 11:53:34 DEBUG[4315] devicestate.c: Changing state for >>SIP/12347 >> > - >> > >state 1 (Not in use) >> > >Aug 11 11:53:34 DEBUG[4615] app_queue.c: Device 'SIP/12347' changed to >> > >state >> > >'1' (Not in use) >> > > >> > >Ele simplesmente liga, chia e corta a ligação imediatamente, a partir >> > daí >> > >as >> > >ligações pelo E1 não se realizam mais. >> > > >> > >NOTICE[4981]: app_dial.c:1029 dial_exec_full: Unable to create channel >> > of >> > >type 'ZAP' (cause 34 - Circuit/channel congestion) >> > > == Everyone is busy/congested at this time (1:0/1/0) >> > > >> > >Receber ligação de forma nenhuma. >> > >As mesmas configurações (trocando o hd de máquina) funciona >> > perfeitamente. >> > >Já tentei usar também com outra placa intel e um p4 HT sem dual core, >> > mas a >> > >falha permaneceu. >> > >Já vi algumas coisas parecidas na lista mas nada que chegue ao amago >> > dessa >> > >questao. >> > >Alguem já viu algo parecido? Tem alguma idéia do que possa ser feito >> > para o >> > >sistema completo funcionar? >> > > >> > > >> > >-- >> > >Ralph Liebessohn >> > >ICQ: 74835911 >> > >Skype: liebessohn >> > >> >> >>Oi Fábio, >> >> >>vamos as configurações. >>astk:/etc# cat /etc/ zaptel.conf >> >>span=1,0,1,ccs,hdb3,crc4,yellow >>#span=2,0,1,ccs,hdb3,crc4,yellow >>#span=3,0,1,ccs,hdb3,crc4,yellow >>#span=4,0,1,ccs,hdb3,crc4,yellow >> >>bchan=1-15,17-31 >>dchan=16 >> >>#bchan=32-46,48-62 >>#dchan=47 >> >>#bchan=63-77,79-93 >>#dchan=78 >> >>#bchan=94-108,110-124 >>#dchan=109 >> >>loadzone = us >>loadzone = br >>defaultzone = br >> >> >>astk:/etc# cat /etc/asterisk/ zapata.conf >>[trunkgroups] >> >>[channels] >>context=default >>switchtype=national >>pridialplan=international >>;signalling=pri_cpe >>rxwink=300 ; Atlas seems to use long (250ms) winks >>usecallerid=yes >>hidecallerid=no >>callwaiting=yes >>usecallingpres=yes >>callwaitingcallerid=yes >>threewaycalling=yes >>transfer=yes >>canpark=yes >>cancallforward=yes >>callreturn=yes >>echocancel=yes >>echocancelwhenbridged=yes >>echotraining=yes >>echotraining=400 >>rxgain=0.0 >>txgain=0.0 >> >>group=1 >>callgroup=1 >>pickupgroup=1 >>immediate=no >>transfertobusy=no >> >>signalling=pri_cpe >> >>channel => 1-15,17-31 >>;channel => 32-46,48-62,63-77,79-93 >>;channel => 94-108,110-124 >> >>astk:/etc# zttool >>Alarms Span >>OK T4XXP (PCI) Card 0 Span 1 >>UNCONFIGURED T4XXP (PCI) Card 0 Span 2 >>UNCONFIGURED T4XXP (PCI) Card 0 Span 3 >>UNCONFIGURED T4XXP (PCI) Card 0 Span 4 >> >>Span1 (Não sei interpretar essas informações) >>Current Alarms: No alarms. >>Sync Source: Internally clocked >>IRQ Misses: 0 >>Bipolar Viol: 0 >>Tx/Rx Levels: 1/ 0 >>Total/Conf/Act: 31/ 31/ 0 >> 1111111111222222222333 >>1234567890123456789012345789012 >> >>astk:/etc# lspci -v >>00:00.0 Host bridge: ATI Technologies Inc Unknown device 5a33 (rev 01) >> Subsystem: Intel Corporation Unknown device d600 >> Flags: bus master, 66MHz, medium devsel, latency 64 >> Memory at <ignored> (64-bit, non-prefetchable) >> >>00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 >>[Normal decode]) >> Flags: bus master, 66MHz, medium devsel, latency 99 >> Bus: primary=00, secondary=01, subordinate=01, sec-latency=68 >> I/O behind bridge: 0000e000-0000efff >> Memory behind bridge: fde00000-fdefffff >> Prefetchable memory behind bridge: d8000000-dfffffff >> Capabilities: [b0] #0d [0000] >> >>00:11.0 IDE interface: ATI Technologies Inc ATI 437A Serial ATA Controller >>(rev 80) (prog-if 8f [ >>Master SecP SecO PriP PriO]) >> Subsystem: Intel Corporation Unknown device d600 >> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 185 >> I/O ports at ff00 [size=8] >> I/O ports at fe00 [size=4] >> I/O ports at fd00 [size=8] >> I/O ports at fc00 [size=4] >> I/O ports at fb00 [size=16] >> Memory at fe02f000 (32-bit, non-prefetchable) [size=512] >> [virtual] Expansion ROM at 80000000 [disabled] [size=512K] >> Capabilities: [60] Power Management version 2 >> Capabilities: [50] Message Signalled Interrupts: 64bit- Queue=0/0 >>Enable- >> >>00:12.0 IDE interface: ATI Technologies Inc ATI 4379 Serial ATA Controller >>(rev 80) (prog-if 8f [ >>Master SecP SecO PriP PriO]) >> Subsystem: Intel Corporation Unknown device d600 >> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 193 >> I/O ports at fa00 [size=8] >> I/O ports at f900 [size=4] >> I/O ports at f800 [size=8] >> I/O ports at f700 [size=4] >> I/O ports at f600 [size=16] >> Memory at fe02e000 (32-bit, non-prefetchable) [size=512] >> [virtual] Expansion ROM at 80080000 [disabled] [size=512K] >> Capabilities: [60] Power Management version 2 >> Capabilities: [50] Message Signalled Interrupts: 64bit- Queue=0/0 >>Enable- >> >>00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller >>(rev 80) (prog-if 10 [ >>OHCI]) >> Subsystem: Intel Corporation Unknown device d600 >> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 177 >> Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] >> Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 >>Enable- >> >>00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller >>(rev 80) (prog-if 10 [ >>OHCI]) >> Subsystem: Intel Corporation Unknown device d600 >> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 177 >> Memory at fe02c000 (32-bit, non-prefetchable) [size=4K] >> Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 >>Enable- >> >>00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host >>Controller (rev 80) (prog-if 20 >>[EHCI]) >> Subsystem: Intel Corporation Unknown device d600 >> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 177 >> Memory at fe02b000 (32-bit, non-prefetchable) [size=4K] >> Capabilities: [dc] Power Management version 2 >> Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 >>Enable- >> >>00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 82) >> Subsystem: Intel Corporation Unknown device d600 >> Flags: 66MHz, medium devsel >> I/O ports at 0b00 [size=16] >> Memory at fe02a000 (32-bit, non-prefetchable) [size=1K] >> >>00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE >>Controller ATI (rev 80) >> (prog-if 8a [Master SecP PriP]) >> Subsystem: Intel Corporation Unknown device d600 >> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 169 >> I/O ports at <unassigned> >> I/O ports at <unassigned> >> I/O ports at <unassigned> >> I/O ports at <unassigned> >> I/O ports at f400 [size=16] >> Capabilities: [70] Message Signalled Interrupts: 64bit- Queue=0/0 >>Enable- >> >>00: 14.2 Audio device: ATI Technologies Inc Unknown device 437b (rev 01) >> Subsystem: Intel Corporation Unknown device d600 >> Flags: bus master, slow devsel, latency 64, IRQ 169 >> Memory at fe024000 (64-bit, non-prefetchable) [size=16K] >> Capabilities: [50] Power Management version 2 >> Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 >>Enable- >> >>00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) >> >> Subsystem: Intel Corporation Unknown device d600 >> Flags: bus master, 66MHz, medium devsel, latency 0 >>astk:/etc# lspci -v >>00:00.0 Host bridge: ATI Technologies Inc Unknown device 5a33 (rev 01) >> Subsystem: Intel Corporation Unknown device d600 >> Flags: bus master, 66MHz, medium devsel, latency 64 >> Memory at <ignored> (64-bit, non-prefetchable) >> >>00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 >>[Normal decode]) >> Flags: bus master, 66MHz, medium devsel, latency 99 >> Bus: primary=00, secondary=01, subordinate=01, sec-latency=68 >> I/O behind bridge: 0000e000-0000efff >> Memory behind bridge: fde00000-fdefffff >> Prefetchable memory behind bridge: d8000000-dfffffff >> Capabilities: [b0] #0d [0000] >> >>00:11.0 IDE interface: ATI Technologies Inc ATI 437A Serial ATA Controller >>(rev 80) (prog-if 8f [Master SecP SecO PriP PriO]) >> Subsystem: Intel Corporation Unknown device d600 >> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 185 >> I/O ports at ff00 [size=8] >> I/O ports at fe00 [size=4] >> I/O ports at fd00 [size=8] >> I/O ports at fc00 [size=4] >> I/O ports at fb00 [size=16] >> Memory at fe02f000 (32-bit, non-prefetchable) [size=512] >> [virtual] Expansion ROM at 80000000 [disabled] [size=512K] >> Capabilities: [60] Power Management version 2 >> Capabilities: [50] Message Signalled Interrupts: 64bit- Queue=0/0 >>Enable- >> >>00:12.0 IDE interface: ATI Technologies Inc ATI 4379 Serial ATA Controller >>(rev 80) (prog-if 8f [Master SecP SecO PriP PriO]) >> Subsystem: Intel Corporation Unknown device d600 >> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 193 >> I/O ports at fa00 [size=8] >> I/O ports at f900 [size=4] >> I/O ports at f800 [size=8] >> I/O ports at f700 [size=4] >> I/O ports at f600 [size=16] >> Memory at fe02e000 (32-bit, non-prefetchable) [size=512] >> [virtual] Expansion ROM at 80080000 [disabled] [size=512K] >> Capabilities: [60] Power Management version 2 >> Capabilities: [50] Message Signalled Interrupts: 64bit- Queue=0/0 >>Enable- >> >>00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller >>(rev 80) (prog-if 10 [OHCI]) >> Subsystem: Intel Corporation Unknown device d600 >> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 177 >> Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] >> Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 >>Enable- >> >>00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller >>(rev 80) (prog-if 10 [OHCI]) >> Subsystem: Intel Corporation Unknown device d600 >> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 177 >> Memory at fe02c000 (32-bit, non-prefetchable) [size=4K] >> Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 >>Enable- >> >>00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host >>Controller (rev 80) (prog-if 20 [EHCI]) >> Subsystem: Intel Corporation Unknown device d600 >> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 177 >> Memory at fe02b000 (32-bit, non-prefetchable) [size=4K] >> Capabilities: [dc] Power Management version 2 >> Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 >>Enable- >> >>00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 82) >> Subsystem: Intel Corporation Unknown device d600 >> Flags: 66MHz, medium devsel >> I/O ports at 0b00 [size=16] >> Memory at fe02a000 (32-bit, non-prefetchable) [size=1K] >> >>00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE >>Controller ATI (rev 80) (prog-if 8a [Master SecP PriP]) >> Subsystem: Intel Corporation Unknown device d600 >> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 169 >> I/O ports at <unassigned> >> I/O ports at <unassigned> >> I/O ports at <unassigned> >> I/O ports at <unassigned> >> I/O ports at f400 [size=16] >> Capabilities: [70] Message Signalled Interrupts: 64bit- Queue=0/0 >>Enable- >> >>00:14.2 Audio device: ATI Technologies Inc Unknown device 437b (rev 01) >> Subsystem: Intel Corporation Unknown device d600 >> Flags: bus master, slow devsel, latency 64, IRQ 169 >> Memory at fe024000 (64-bit, non-prefetchable) [size=16K] >> Capabilities: [50] Power Management version 2 >> Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 >>Enable- >> >>00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) >> >> Subsystem: Intel Corporation Unknown device d600 >> Flags: bus master, 66MHz, medium devsel, latency 0 >> >>00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80) >>(prog-if 01 [Subtractive decode]) >> Flags: bus master, VGA palette snoop, 66MHz, medium devsel, >>latency 64 >> Bus: primary=00, secondary=02, subordinate=02, sec-latency=64 >> I/O behind bridge: 0000d000-0000dfff >> Memory behind bridge: fdd00000-fddfffff >> Prefetchable memory behind bridge: fdc00000-fdcfffff >> >>01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon >>Xpress 200] (prog-if 00 [VGA]) >> Subsystem: Intel Corporation Unknown device d600 >> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 5 >> Memory at d8000000 (32-bit, prefetchable) [size=128M] >> I/O ports at ee00 [size=256] >> Memory at fdef0000 (32-bit, non-prefetchable) [size=64K] >> [virtual] Expansion ROM at fde00000 [disabled] [size=128K] >> Capabilities: [50] Power Management version 2 >> Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 >>Enable- >> >>02: 02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. >>RTL-8139/8139C/8139C+ (rev 10) >> Subsystem: Intel Corporation Unknown device d600 >> Flags: bus master, medium devsel, latency 64, IRQ 201 >> I/O ports at de00 [size=256] >> Memory at fddff000 (32-bit, non-prefetchable) [size=256] >> Capabilities: [50] Power Management version 2 >> >>02:04.0 Communication controller: Digium, Inc. Wildcard TE405P (2nd Gen) >>(rev 02) >> Flags: bus master, medium devsel, latency 64, IRQ 209 >> Memory at fddfe000 (32-bit, non-prefetchable) [size=128] >> >>astk:/etc# uname -r (Estou usando Debian) >>2.6.16-2-686-smp >> >> >>Essas configurações são as mesmas que funcionam em um Sempron 2400 e não >>funcionam em um pentium 4 2.8. Testei esse fim de semana em um pentium III >>1.0GHz (2 processadores) e funcionou normal também. >>Qualquer idéia ou alguma informação a mais que seja necessária para tentar >>resolver o problema é só mandar. >> >>-- >> >>Ralph Liebessohn >>ICQ: 74835911 >>Skype: liebessohn >> > > >Boa tarde. >Hoje me sugeriram retirar o módulo de cancelamento de eco da placa. E >funcionou. >Sem esse módulo parece estar tudo normal, vou realizar mais testes para >poder afirmar com certeza. >Obrigado pelo apoio. > >-- >Ralph Liebessohn >ICQ: 74835911 >Skype: liebessohn >_______________________________________________ >LIsta de discussões AsteriskBrasil.org >AsteriskBrasil em listas.asteriskbrasil.org >http://listas.asteriskbrasil.org/mailman/listinfo/asteriskbrasil > >_______________________________________________ >Acesse o wiki AsteriskBrasil.org: >http://www.asteriskbrasil.org _________________________________________________________________ MSN Busca: fácil, rápido, direto ao ponto. http://search.msn.com.br