André, Coloque em extensions.conf
[globals] DYNAMIC_FEATURES => hangup#pickupexten#atxfer#blidxfer E não se esqueça de colocar o tT nas exten's, p. ex.: exten => - _NXXXXXXX,1,Dial(SIP/${EXTEN},30,tT) Acredito que vai funcionar! -----Mensagem original----- De: asteriskbrasil-bounces em listas.asteriskbrasil.org [mailto:asteriskbrasil-bounces em listas.asteriskbrasil.org]Em nome de Luiz Henrique Gomes Enviada em: quinta-feira, 18 de maio de 2006 16:19 Para: asteriskbrasil em listas.asteriskbrasil.org Assunto: Re: [AsteriskBrasil] transferencia assistida Você colocou o "include => parkedcalls" no contexto dos ramais ? Outro detalhe, você tem clicar rápido em *2, não pode demorar muito entre o * e o 2. Luiz -----Original Message----- From: [EMAIL PROTECTED] [mailto:asteriskbrasil-bounces em listas.asteriskbrasil.org] On Behalf Of "André Felipe R. dos Santos" Sent: Thursday, May 18, 2006 3:47 PM To: asteriskbrasil em listas.asteriskbrasil.org Subject: Re: [AsteriskBrasil] transferencia assistida pior que ja configurei sim, segue ae abaixo como que ta o meu features.conf: ; ; Sample Parking configuration ; [general] ;parkext => 700 ; What extension to dial to park ;parkpos => 701-720 ; What extensions to park calls on. These needs to be ; numeric, as Asterisk starts from the start position ; and increments with one for the next parked call. context => parkedcalls ; Which context parked calls are in parkingtime => 45 ; Number of seconds a call can be parked for ; (default is 45 seconds) transferdigittimeout => 3 ; Number of seconds to wait between digits when transfering a call courtesytone = beep ; Sound file to play to the parked caller ; when someone dials a parked call xfersound = beep ; to indicate an attended transfer is complete xferfailsound = beeperr ; to indicate a failed transfer adsipark = yes ; if you want ADSI parking announcements findslot => next ; Continue to the 'next' free parking space. ; Defaults to 'first' available pickupexten = *8 ; Configure the pickup extension. Default is *8 featuredigittimeout = 500 ; Max time (ms) between digits for ; feature activation. Default is 500 [featuremap] ;blindxfer => #1 ; Blind transfer ;disconnect => *0 ; Disconnect ;automon => *1 ; One Touch Record atxfer => *2 ; Attended transfer [applicationmap] ; Note that the DYNAMIC_FEATURES channel variable must be set to use the features ; defined here. The value of DYNAMIC_FEATURES should be the names of the features ; to allow the channel to use separated by '#'. For example: ; Set(DYNAMIC_FEATURES=myfeature1#myfeature2#myfeature3) ; ;testfeature => #9,callee,Playback,tt-monkeys ;Play tt-monkeys to ;callee if #9 was pressed Luiz Henrique Gomes escreveu: >Andre, você configurou o features.conf ? > >O mesmo está da seguinte forma: > >[featuremap] >atxfer => *2 ; Attended transfer > >Desta forma funciona perfeitamente. > >Luiz > >-----Original Message----- >From: asteriskbrasil-bounces em listas.asteriskbrasil.org >[mailto:asteriskbrasil-bounces em listas.asteriskbrasil.org] On Behalf Of >"André Felipe R. dos Santos" >Sent: Thursday, May 18, 2006 2:14 PM >To: asteriskbrasil em listas.asteriskbrasil.org >Subject: [AsteriskBrasil] transferencia assistida > >Ola Lista........... > >estou com um * instalado numa maquina com uma E1, porem so estou >conseguindo fazer a transferencia as cegas, teclando #1 (default do >asterisk mesmo) ja alterei lah no arquivo features.conf e desmarquei a >opcao to atxfer para ser o *2 (default do asterisk também),porém se seu >preciono esta sequencia, ele nao faz nda so ta funcionando mesmo a >transferencia as cegas.... se alguem pode me ajudar fico muito grato............ > >segue os dados da minha maquina: >SO - slackware 10.2 >kernel - 2.6.9.22 >asterisk - 1.2.4 > >obrigado............. > > -- André Felipe R. dos Santos Linux and Network Solutions www.windstar.com.br =========================== == Seja Livre, Use Linux == ===========================