Sure Joe.
running dahdi_genconf only creates configuration templates in
/etc/asterisk - I believe the file is dahdi-channels.conf. You need to
then copy/paste or #include them in /etc/asterisk/chan_dahdi.conf
before Asterisk will know anything about them.
Hope that helps!
Andy
|
|
|
Andrew M.
Lauppe
Consultant
|
|
4051B Executive Park Dr.
Harrisburg, PA 17111
+1 (877) OS-LINUX x23
+1 (484) 421-9919 direct |
|
On 1/13/10 4:39 PM, Joe Black wrote:
I put a TDM400p with one FXO port in a machine, installed
AsteriskNow, and tried to get up and running, but have run into some
trouble...
When I run dahdi_cfg -vv, it shows the FXO port on channel 1:
> DAHDI Tools Version - 2.2.0
> DAHDI Version: 2.2.0.2
> Echo Canceller(s): MG2
> Configuration
> ======================
> Channel map:
> Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves:
01)
> 1 channels to configure.
> Setting echocan for channel 1 to mg2
"dahdi show status" shows the card, with no alarms:
> Description Alarms IRQ bpviol CRC4
> Wildcard TDM410P Board 1 OK 1 0 0
But..."dahdi show channels" gives me zip:
> phony*CLI> dahdi show channels
> Chan Extension Context Language MOH Interpret
> phony*CLI>
Any clues for this newbie?
|
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisknow mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisknow
