According to Digium's data sheet fully populated TDM2400P requires at least 1.4 Ghz Pentium-4 or better. It's also a full lengths PCI card which means it's much bigger then net4801 designed for embedded applications. As far as power consumption, there is no info about it in Digium's data sheet, but according to Sangoma's docs, 24 port FXS card requires 200W power supply, so some soldering to the DC jack is really not gonna help, unless you change that power brick to some 150-200W one...
Dmitry. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Graham S. Jarvis Sent: Thursday, February 02, 2006 4:58 AM To: Discussion of AstLinux - Asterisk on Compact Flash Subject: Re: [Astlinux-users] Soekris/TDM2400P Hello All, Anyone with _any_ experience with the Digium TDM2400P? (Any platform) I'd like to put a 4fxo/20fxs into a net4801. It looks like I can get 12V to the card with some soldering to the DC jack - thanks Olivier Taylor. (NOT via J10 - Canuck15 - this only supplies 5V, according to the manual) Is this going to work? Does the board have enough cpu or is the 4801 going to die on the 4th outgoing call? Would I be better off with a PC? Are these standard TDM drivers on astlinux at all? All help appreciated. -Graham S. Jarvis- _______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED] _______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
