Canuck15 wrote: > I phoned Soekris and the main guy (heavy accent) told me that the JP10 > connector will supply 12v to the Sangoma molex connector. Of course there > is always the possibility we had a miscommunication. Can anyone confirm or > deny? > > I phoned Sangoma and the tech told me that Sangoma FXS ports require 100ma > per port during ringing which comes from the 12v connected to the molex > connector. That is 200ma per 2 port module while both are ringing > simultaneously. If your not getting a lot of simultaneous ringing or it's > all outbound then I don't think you need much power. That is the impression > I got in my discussion with the Sangoma tech but he sounded like a low level > tech and had to ask someone else a couple times. It would be nice to > confirm these facts as well. > >
Even if you could get the power requirements it would be impossible (far beyond impossible) to handle the echo cancellation requirements of that board in software (native Zaptel echo can). -- Kristian Kielhofner _______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
