[EMAIL PROTECTED] wrote:
> Hi!
>
> I just installed the latest version of AstLinux (i586) on CF.
> The CF was installed in a mini-itx case (no cd-rom, no video card). The
> motherboard is a VIA vt82C686b.
> The Flash Card is recognized by the BIOS as secondary master. I access
> the box with a serial link and Minicom 2.1.
>
> My problem is: GRUB hangs without error message.
>
> The Kernel image seems to be found, as shown in the output from the
> following CLI commands:
>
> ------------------------------------------------------------------------
> --------
>
> grub> root (hd0,0)
> Filesystem type is ext2fs, partition type 0x83
>
> grub> kernel /boot/bzImage root=/dev/hda1 astlinux=i586 astkd=/dev/sda1
> astopt=/dev/hda2 ide=nodma
> [Linux-bzImage, setup=0x1400, size=0x182595]
>
> grub> setup (hd0)
> Checking if "/boot/grub/stage1" exists... yes
> Checking if "/boot/grub/stage2" exists... yes
> Checking if "/boot/grub/e2fs_stage1_5" exists... yes
> succeeded"embed /boot/grub/e2fs_stage1_5 (hd0)"... 16 sectors are
> embedded.
> Runnin "install /boot/grub/stage1 (hd0) (hd0)1+16 p
> (hd0,0)//boot/grub/stage2
> /boot/grub/menu.lst"... succeeded
> Done.
>
> grub> boot
>
> ------------------------------------------------------------------------
> --------
>
> At this stage, nothing happens, it just hangs. Minicom now shows
> "Offline" status. I was wondering if it was a serial connection issue,
> but I can't ping eth0 nor eth1 at 192.168.101.1, and no DHCP lease was
> given from my DHCP server.
>
> Any hint?
>
> Thanks,
>
> Pierre
Pierre,
If the flash card is secondary master you will have to update GRUBs
config files. Specifically the kernel command line and anything that
points to hd0 (will probably be hd1).
--
Kristian Kielhofner
_______________________________________________
Astlinux-users mailing list
[email protected]
http://lists.kriscompanies.com/mailman/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to [EMAIL
PROTECTED]
