I just flashed a CF card with 0.4 and gave it a try in an IBM netstation, where I ran into some issue. My USB Keydisk no longer works. This is the output of my dmesg:
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v2.3 PCI: Setting latency timer of device 0000:00:05.2 to 64 uhci_hcd 0000:00:05.2: UHCI Host Controller uhci_hcd 0000:00:05.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:05.2: irq 11, io base 0x0000ff00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usb 1-1: new full speed USB device using uhci_hcd and address 2 usb 1-1: device descriptor read/64, error -71 usb 1-1: device descriptor read/64, error -71 usb 1-1: new full speed USB device using uhci_hcd and address 3 usb 1-1: device descriptor read/64, error -71 usb 1-1: device descriptor read/64, error -71 usb 1-1: new full speed USB device using uhci_hcd and address 4 usb 1-1: device not accepting address 4, error -71 usb 1-1: new full speed USB device using uhci_hcd and address 5 usb 1-1: device not accepting address 5, error -71 usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver Another thing is a question about ISDN support - what drivers are included in that version, or how do I configure a collogne chipset passive BRI card (I guess a billion card, but). Bets regards Alexander _______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
