RT the jolly old FM and one will see that your router should have ports 5060 and 10000-20000 forwarded to the asterisk server.
Also, you did set up the NAT statements in sip.conf didn't you? Mark On Sun, 2006-08-13 at 22:48 +0200, Nedi wrote: > hi, i'm again, Please help me ! > > i have cablemodem and asus 500g router and i use astlinux 3.0 > i use intern ip adress from astlinux as my DMZ. > > and problem is: > > i try to use my astlinux server with dyndns.org as server adress > i take my username.dyndns.org and > > if i call somebody. he hear me perfect but i can't hear him > > If i put ip adress from my cable modem direct i have the same problem. > > how can i use my astlinux with dnydns.org wenn i'm away with a > softphone > > my router is 192.168.1.1 and my astlinux is 192.168.1.132 > and my settingsin rc.conf is so > > ## DMZ Support ### > ## Uncomment the following to utilize a DMZ network. The DMZ network > by ## > ## default is only allowed to access the internet (via EXTIF). It is > not ## > ## able to access services on the AstLinux machine, or any of the > machines ## > ## on INTIF. To allow access to services on the AstLinux machine ## > ## (Asterisk, etc.) set DMZTYPE=extme ## > DMZTYPE=extonly > #DMZIF="eth2" > #DMZIP="192.168.1.132" > #DMZNM="255.255.255.0" > > should i change something ?? > > nedi > _______________________________________________ > Astlinux-users mailing list > [email protected] > http://lists.kriscompanies.com/mailman/listinfo/astlinux-users > > Donations to support AstLinux are graciously accepted via PayPal to [EMAIL > PROTECTED] _______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
