I'm trying to get 0.4.3 going on a Soekris 4801. Its booting ok and I
logged in ok. However when I try to init a USB key using genkd it gives
a general segmentation fault and appears not to run to completion.
Here's the trace:
Part 1 - after inserting the key (currently FAT or FAT32 formatted):
usb 1-1: new full speed USB device using ohci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: LEXAR Model: DIGITAL FILM Rev: /W1.
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 125952 512-byte hdwr sectors (64 MB)
sda: Write Protect is off
sda: assuming drive cache: write through
SCSI device sda: 125952 512-byte hdwr sectors (64 MB)
sda: Write Protect is off
sda: assuming drive cache: write through
sda:<7>usb-storage: queuecommand called
sda1
sd 0:0:0:0: Attached scsi removable disk sda
Part 2 - running genkd
pbx ~ # genkd
Segmentation fault
This script will help to create a KeyDrive to store
your AstLinux configuration. MAKE SURE THAT YOUR DRIVE IS
CONNECTED.
I will use /dev/sda1
Please type yes to continue
Is this okay? y
pbx ~ #
What should I try next? Note that this box doesn't have a physical
ethernet connection yet (in case that makes a difference).
Feel free to update this page directly:
http://www.voip-info.org/wiki/view/AstLinux+Users+Guide+Chapter+2
which is where I'm documenting it. There are also some other questions
on that page:
?? what is a good size for a keydisk ??
?? the below assumes a Soekris, what happens with a generic PC or EPIA?
E.g. how you do adjust for a different USB port?
Feel free to jump in directly on that page, or email me back and I'll
add them.
cheers, michael
_______________________________________________
Astlinux-users mailing list
[email protected]
http://lists.kriscompanies.com/mailman/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to [EMAIL
PROTECTED]
