Richard D Alloway wrote:
On Fri, 8 Sep 2006, Kristian Kielhofner wrote:
Richard D Alloway wrote:
Thanks for the quick reply, Kristian!
Right now it's blank, but I did have wcfxo in there, but didn't know if my
X100p card was causing the problems...
Should I have something?
-Rich
Rich,
Try "ztd-eth" and then make sure that /stat/etc/zaptel.conf or
/mnt/kd/zaptel.conf is configured and reboot.
Okay, now the ztd-eth is static across reboots :)
That's a good thing!
But, when I do and ifconfig, I see there are 674582 RX packets and 27 TX
packets. For some reason, even though the zaptel interface shows up (cat
/proc/zaptel/1 shows it) the box isn't sending the packets.
BTW, this is AstLinux 0.4.3 on a SC1100 SBC.
-Rich
Rich,
I have never used tdmoe before, here are some AstLinux specific things
to check:
1) Make sure that your ethernet interfaces for TDMoE do not conflict
with any others (I doubt that is your problem here).
2) Make sure that iptables isn't getting in the way. Technically this
isn't IP territory, but just for kicks, try disabling iptables with
"service iptables stop".
3) Clocking. Try to stop zaptel/asterisk and unload everything, and
then try loading ztdummy and ztd-eth in different orders with different
span settings in zaptel.
Sorry I can't be of more help!
--
Kristian Kielhofner
_______________________________________________
Astlinux-users mailing list
Donations to support AstLinux are graciously accepted via PayPal to
[EMAIL PROTECTED].
