Barry Fawthrop wrote:
> Hi Kristian
> I tried setting
> sendrpid = yes
> trustrpid = yes
> insecure = very
>
> No change
> If I enable Caller ID on the Cg-410 then it hangs up and reports a
> failed to authenticate user
> if I disable Caller ID on the Cg-410 then it works, but you only get the
> Cg-410 callerID not the PSTN caller ID
>
> Any thing else ?
>
> Thanks
> Barry
>
Barry,
Does the Clipcomm register to AstLinux or is it "static". If it
registers, make sure that it is actually registered "sip show peers".
If it is "static", make sure that you have host=[ip address] set for
that SIP peer entry.
--
Kristian Kielhofner
_______________________________________________
Astlinux-users mailing list
[email protected]
http://lists.kriscompanies.com/mailman/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to [EMAIL
PROTECTED]
