Jonathan GF wrote: > Ok, > > At least in their website (openvox.com.cn <http://openvox.com.cn>) they > say that their card and their modules are interchangeable with Digiums > devices: > > "Easy to use : Full software and hardware compatible with digium's > TDM400P.* Module Pin to Pin compatible with X100M and S100M.You can use > Digium's X100M/S100M module on this card, or use our FXO-100 / FXS-100 > Module on TDM400P." > > Being a half of the price than a Digium TDM400, in my humble opinion, > have support for this type of cards would be really nice in order to > prepare low cost mock-ups for future well built systems for production. > > Let's see what Kris thinks ;)
That card will work with no additional changes. I thought you were talking about their 12 port card. The way I look at it, sure the modules are cheap and the card is cheap, but from my experience they are not as reliable as the Digium cards. Also good luck if you do have a module fail. In any case, the 4 port cart will work, so I guess you can say it's supported. Darrick -- Darrick Hartman DJH Solutions, LLC http://www.djhsolutions.com ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Astlinux-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
