Hi
Question 1. What action did you perform to get an astulib?
Answer 1. Sorry nothing that I'm aware of
Question 2. Also why do you need to edit the init file for dnsmasq?
What are you trying to do? (I ask for two reasons: There may be a way
to do what
you want without editing it, and if not, it may benefit others).-----
Answer 2. I have win2003SBS providing both DNS and DHCP on my internal
network and want to disable AstLinux from providing these services (not
to worried about DNS forwarding but want to disable DHCP server). I have
tried to set NODHCP to NODCHP="$INTIF" in my rc.conf (rebooted), but
AstLinux is still providing DHCP
Additional info
INTIF=eth0
eth0 Link encap:Ethernet HWaddr 00:40:63:DA:DE:FD
inet addr:10.8.0.254 Bcast:10.8.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:678 errors:0 dropped:0 overruns:0 frame:0
TX packets:620 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:73541 (71.8 KiB) TX bytes:127061 (124.0 KiB)
Interrupt:11 Base address:0xd000
eth1 Link encap:Ethernet HWaddr 00:40:63:DA:DE:A3
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:454 errors:0 dropped:0 overruns:0 frame:0
TX packets:816 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:42477 (41.4 KiB) TX bytes:53612 (52.3 KiB)
Interrupt:12 Base address:0xe800
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
ppp0 Link encap:Point-to-Point Protocol
inet addr:xxx.xxx.xxx.xxx P-t-P:xxx.xxx.xxx.xxx
Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:396 errors:0 dropped:0 overruns:0 frame:0
TX packets:757 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:30205 (29.4 KiB) TX bytes:35049 (34.2 KiB)
Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Darrick Hartman (lists)
Sent: Friday, 4 April 2008 11:48 AM
To: AstLinux Users Mailing List
Subject: Re: [Astlinux-users] Can't delete (or whiteout) initscript
/etc/init.d/dnsmasq
Guy Neale wrote:
> Hi
>
>
>
> I'm trying to delete the dnsmasq script and am unsure if I need to do
> something special when using unionfs. eg manually create a whiteout
file
> in my unionfs volume or remount the unionfs volume in a different way,
> etc. I've tried the conventional method using rm and then rebooting,
but
> the dnsmasq script reappears in /etc/init.d and runs. I'm not to sure
> where or how unionfs creates these whiteout files but I have checked
> /oldroot/mnt/asturw/etc (see list below), any ideas
>
>
>
>
>
> astlinux-0.5-1537
>
> pbx / # mount
>
> rootfs on / type rootfs (rw)
>
> /dev/root on /oldroot type ext2 (rw)
>
> /dev/hda1 on /oldroot/cdrom type vfat
> (ro,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1)
>
> none on /oldroot/mnt/astulib type tmpfs (rw)
>
> /dev/hdb2 on /oldroot/mnt/asturw type ext2 (rw,noatime)
>
> none on /oldroot/mnt/asturo type tmpfs (ro)
>
> none on / type unionfs
>
(rw,dirs=/oldroot/mnt/asturw=rw:/oldroot/mnt/astulib=rw:/oldroot/mnt/ast
uro=ro)
>
What action did you perform to get an astulib?
Also why do you need to edit the init file for dnsmasq? What are you
trying to do? (I ask for two reasons: There may be a way to do what
you want without editing it, and if not, it may benefit others).
Darrick
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to [EMAIL
PROTECTED]
