I find that my system that was running trunk 1670 always would run itself to
within about 30 megs of all ram showing used in top, however it never would
crash or hang. I just loaded version 1895 on and will see how it goes..

-Christopher

 

From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Ray
Fadaie
Sent: Friday, August 15, 2008 10:44 PM
To: AstLinux Users Mailing List
Subject: Re: [Astlinux-users] Memory leakage

 

Hmmm, it is strange. I do use sound files but doesn't Asterisk release the
memory after it played those sounds?

As for the memory diagnostic tools, I am pretty much limited to what
Astlinux offers. Any ideas what tools could be used here?

On Fri, Aug 15, 2008 at 10:30 PM, Lonnie Abelbeck
<[EMAIL PROTECTED]> wrote:


On Aug 15, 2008, at 8:46 PM, Ray Fadaie wrote:

> Hi,
>
> I've been using Astlinux for more than a year now. I had been using
> 0.4.8 until just recently that I switched to 0.5. I am running it on
> a small box with only 128M of RAM (Ebox 2300). The problem with
> 0.4.8 was that it kept hanging after almost of 2 weeks of running
> (every time). I would guess there was some memory leake somewhere in
> that version.
> I switched to 0.5 and it's been running for 3 weeks now without
> intruption. I am monitoring the available memory almost every day
> and I can see that it decreases. It started somewhere in 36M area
> and I am down to 28-9M these days. [It obviously should not act like
> MS-Windows ;) ]
> I am worried I may end up to the same situation.
> Do you guys have any idea what could be the problem?

Ray,
I have a couple Soekris net4801's (128K Memory) and have used 0.4.x
and, over the last several months, an asterisk 1.4 trunk version.  In
both cases, they have run for months without issue.

For a data point, I just checked one 128MB AstLinux box's "top" show
the following:

 >>Mem: 68608K used, 58476K free, 0K shrd, 4020K buff, 52908K cached
 >>CPU:  1.1% usr  0.9% sys  0.0% nice 97.6% idle  0.0% io  0.0% irq
0.1% softirq
 >>Load average: 0.00 0.00 0.00

Note that asterisk loads modules and other resources as needed,
specifically sound files will reduce the available memory, and unless
they need to be purged to make room, they hang around.

If you have any memory diagnostic tools to run on your box, that might
be a start.

Lonnie



-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great
prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100
<http://moblin-contest.org/redirect.php?banner_id=100&url=/> &url=/
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users

Donations to support AstLinux are graciously accepted via PayPal to
[EMAIL PROTECTED]

 

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users

Donations to support AstLinux are graciously accepted via PayPal to [EMAIL 
PROTECTED]

Reply via email to