I'm replacing an aging server in a remote office, and this is my first time working with Asterisk. The server I'm replacing is an aster...@home server that is obviously outdated. The reason for this replacement is a lot of phone static, and the outdated system.
I'm looking to get started with Asterisk. I have a Soekris net5501 and a TDM404E card from Digium with four FXO ports. I have Astlinux 0.6.2 installed on an 8 GB CF card. There are 3 POT lines at this office that the current system uses. Please know that I'm very new to all the terminology associated with Asterisk as well. I need to know where to start! I have the O'Reilly book on Asterisk, but that pertains to a standard install. Astlinux does a lot of custom stuff due to the hardware it is installed on, and I just don't know where to start! I imagine my first goal is to get the module loaded for my specific card. I have loaded the wctdm24xxp module from the command line, but I noticed several errors in dmesg that I believe relate to IRQ conflicts. >From there, I would configure zaptel.conf, and then extensions.conf with my dial plan. I'd also like to explore what settings are important for my system, including firewall config, DHCP for both my phones and the Windows workstations. I'll also need to serve up config files for my phones as well, over tftp I believe. So, let me kick things off by showing you the errors I'm getting when I modprobe the module. # modprobe wctdm24xxp WARNING: /etc/modprobe.conf line 1: ignoring bad line starting with 'options' And: Port 1: Installed -- AUTO FXO (FCC mode) wctdm24xxp0: Missed interrupt. Increasing latency to 4 ms in order to compensate. wctdm24xxp0: Restarting board initialization after increasing latency. wctdm24xxp0: Missed interrupt. Increasing latency to 5 ms in order to compensate. Port 1: Installed -- AUTO FXO (FCC mode) wctdm24xxp0: Missed interrupt. Increasing latency to 6 ms in order to compensate. wctdm24xxp0: Restarting board initialization after increasing latency. wctdm24xxp0: Missed interrupt. Increasing latency to 7 ms in order to compensate. Port 1: Installed -- AUTO FXO (FCC mode) wctdm24xxp0: Missed interrupt. Increasing latency to 8 ms in order to compensate. wctdm24xxp0: Restarting board initialization after increasing latency. wctdm24xxp0: Missed interrupt. Increasing latency to 9 ms in order to compensate. Port 1: Installed -- AUTO FXO (FCC mode) wctdm24xxp0: Missed interrupt. Increasing latency to 10 ms in order to compensate. wctdm24xxp0: Restarting board initialization after increasing latency. wctdm24xxp0: Missed interrupt. Increasing latency to 11 ms in order to compensate. Port 1: Installed -- AUTO FXO (FCC mode) wctdm24xxp0: Missed interrupt. Increasing latency to 12 ms in order to compensate. wctdm24xxp0: Restarting board initialization after increasing latency. wctdm24xxp0: Missed interrupt. Increasing latency to 13 ms in order to compensate. Port 1: Installed -- AUTO FXO (FCC mode) wctdm24xxp0: Missed interrupt. Increasing latency to 14 ms in order to compensate. wctdm24xxp0: Restarting board initialization after increasing latency. wctdm24xxp0: Missed interrupt. Increasing latency to 15 ms in order to compensate. Port 1: Installed -- AUTO FXO (FCC mode) wctdm24xxp0: Missed interrupt. Increasing latency to 16 ms in order to compensate. wctdm24xxp0: Restarting board initialization after increasing latency. wctdm24xxp0: Missed interrupt. Increasing latency to 17 ms in order to compensate. Port 1: Installed -- AUTO FXO (FCC mode) wctdm24xxp0: Missed interrupt. Increasing latency to 18 ms in order to compensate. wctdm24xxp0: Restarting board initialization after increasing latency. wctdm24xxp0: Missed interrupt. Increasing latency to 19 ms in order to compensate. Port 1: Installed -- AUTO FXO (FCC mode) wctdm24xxp0: Missed interrupt. Increasing latency to 20 ms in order to compensate. wctdm24xxp0: Restarting board initialization after increasing latency. wctdm24xxp0: Missed interrupt. Increasing latency to 21 ms in order to compensate. Port 1: Installed -- AUTO FXO (FCC mode) wctdm24xxp0: Missed interrupt. Increasing latency to 22 ms in order to compensate. wctdm24xxp0: Restarting board initialization after increasing latency. wctdm24xxp0: Missed interrupt. Increasing latency to 23 ms in order to compensate. Port 1: Installed -- AUTO FXO (FCC mode) wctdm24xxp0: Missed interrupt. Increasing latency to 24 ms in order to compensate. wctdm24xxp0: Restarting board initialization after increasing latency. wctdm24xxp0: Missed interrupt. Increasing latency to 25 ms in order to compensate. Port 1: Installed -- AUTO FXO (FCC mode) Port 2: Installed -- AUTO FXO (FCC mode) Port 3: Installed -- AUTO FXO (FCC mode) Port 4: Installed -- AUTO FXO (FCC mode) VPM100: Not Present VPMADT032: firmware zaptel-fw-vpmadt032.bin not available from userspace wctdm24xxp0: Missed interrupt. Increasing latency to 26 ms in order to compensate. wctdm24xxp0: Restarting board initialization after increasing latency. wctdm24xxp0: Missed interrupt. Increasing latency to 27 ms in order to compensate. Port 1: Installed -- AUTO FXO (FCC mode) Port 2: Installed -- AUTO FXO (FCC mode) Port 3: Installed -- AUTO FXO (FCC mode) Port 4: Installed -- AUTO FXO (FCC mode) VPM100: Not Present VPMADT032: firmware zaptel-fw-vpmadt032.bin not available from userspace wctdm24xxp0: Missed interrupt. Increasing latency to 28 ms in order to compensate. wctdm24xxp0: Restarting board initialization after increasing latency. wctdm24xxp0: Missed interrupt. Increasing latency to 29 ms in order to compensate. Port 1: Installed -- AUTO FXO (FCC mode) Port 2: Installed -- AUTO FXO (FCC mode) Port 3: Installed -- AUTO FXO (FCC mode) Port 4: Installed -- AUTO FXO (FCC mode) VPM100: Not Present VPMADT032: firmware zaptel-fw-vpmadt032.bin not available from userspace wctdm24xxp0: Missed interrupt. Increasing latency to 30 ms in order to compensate. wctdm24xxp0: Restarting board initialization after increasing latency. wctdm24xxp0: Missed interrupt. Increasing latency to 31 ms in order to compensate. Port 1: Installed -- AUTO FXO (FCC mode) Port 2: Installed -- AUTO FXO (FCC mode) Port 3: Installed -- AUTO FXO (FCC mode) Port 4: Installed -- AUTO FXO (FCC mode) VPM100: Not Present VPMADT032: firmware zaptel-fw-vpmadt032.bin not available from userspace wctdm24xxp0: Missed interrupt. Increasing latency to 32 ms in order to compensate. wctdm24xxp0: Restarting board initialization after increasing latency. wctdm24xxp0: ERROR: Unable to service card within 30 ms and unable to further increase latency. Port 1: Installed -- AUTO FXO (FCC mode) Port 2: Installed -- AUTO FXO (FCC mode) Port 3: Installed -- AUTO FXO (FCC mode) Port 4: Installed -- AUTO FXO (FCC mode) VPM100: Not Present VPMADT032: firmware zaptel-fw-vpmadt032.bin not available from userspace Found a Wildcard TDM: Wildcard TDM410P (4 modules) Thank you for your attention! -- Linuturk www.onitato.com ------------------------------------------------------------------------------ SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada. The future of the web can't happen without you. Join us at MIX09 to help pave the way to the Next Web now. Learn more and register at http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/ _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
