Philip, This is the machine I have connected right now:
VIA PD10000 #cat /proc/cpuinfo processor : 0 vendor_id : CentaurHauls cpu family : 6 model : 9 model name : VIA Nehemiah stepping : 4 cpu MHz : 1002.292 cache size : 64 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu de pse tsc msr cx8 mtrr pge cmov mmx fxsr sse rng rng_en bogomips : 2005.76 clflush size : 32 #lspci 00:00.0 Host bridge: VIA Technologies, Inc. VT8623 [Apollo CLE266] 00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] 00:0f.0 Ethernet controller: VIA Technologies, Inc. VT6105/VT6106S [Rhine-III] (rev 8b) 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) 00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50) 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74) 00:14.0 Ethernet controller: Digium, Inc. Wildcard TDM800P 8-port analog card (rev 11) 01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8623 [Apollo CLE266] integrated CastleRock graphics (rev 03) Note that this is an older board, but one that must be supported. I have the following other hardware that is currently not connected: EPIA V10000 EPIA M9000 EPIA M10000 EPIA (with the Eden 500mhz cpu) VersaLogic board with C7 processor Most of those are supported by the C3-2 option in the kernel. The last one is not. The OLD devices don't support the padlock features anyway, so perhaps those should just be considered 'generic' devices and use the i586 target (which will work). Darrick Philip Prindeville wrote: > If you have a Via-based SBC (mini-ITX or other), please send me the > manufacturer, model #, quantity, and the output of: > > cat /proc/cpuinfo > > Thanks. > > > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by: > SourcForge Community > SourceForge wants to tell your story. > http://p.sf.net/sfu/sf-spreadtheword > _______________________________________________ > Astlinux-users mailing list > Astlinux-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/astlinux-users > > Donations to support AstLinux are graciously accepted via PayPal to > pay...@krisk.org. ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
