Tom, Do this:
rm -rf build_i586 then use the following command to build the image: toolchain/build This will generate a build.log file. gzip that file and send it to me directly. Something is failing in the build processs. Darrick Tom Chadwin wrote: > Confirmed - my attempt to build 0.6.7 for the net5501 produces the > same results as 0.6. Any ideas where to look next? All I've done is > follow the steps on the development page on the Astlinux site > (www.astlinux.org/node/24). That, and I linked /bin/sh to bash instead > of dash, as I read someone said that was wise. > > Thanks > > Tom > > >> Nothing has changed in the 0.6 branch since 0.6.7 was released. > >> It looks like something did not build correctly. I can't say what that was >> with the information you provided. > > > Tom Chadwin wrote: >> Hello all >> >> I'm trying to build from 0.6. The only change I am making to the >> config is to change the target device to net5501. The build completes. >> I then drag the built files into the OS directory of an existing >> Astlinux (net5501) CF card's Runnix partition (clearing the 0.6.7 >> files out of the way) but when I try to boot the Soekris, all seems >> well until we get as far as this: >> >> Looking for AstLinux image... >> AstLinux image found! >> Configuring for unionfs... >> Checking asturw filesystem >> ext2fs_check_if_mount: No such file or directory while determining >> whether /dev/hda2 is mounted. >> >> Fsck detected and repaired errors on /dev/hda2 Copying AstLinux files >> to RAM... >> unmounting squashfs image >> unmounting /cdrom >> Pivoting... >> >> init started: Bunionfs: new lower inode mtime (bindex=1, name=console) >> usyBox v1.8.2 (2009-08-17 10:24:46 BST) >> unionfs: new lower inode mtime (bindex=1, name=etc) >> FATAL: Could not open 'kernel/drivers/char/cs5535_gpio.ko': No such >> file or directory BusyBox v1.8.2 (2009-08-17 10:24:46 BST) multi-call >> binary >> >> Usage: mknod [OPTIONS] NAME TYPE MAJOR MINOR >> >> Create a special file (block, character, or pipe) >> >> Options: >> -m Create the special file using the specified mode (default a=rw) >> >> TYPEs include: >> b: Make a block (buffered) device >> c or u: Make a character (un-buffered) device >> p: Make a named pipe. MAJOR and MINOR are ignored for named pipes >> >> unionfs: new lower inode mtime (bindex=1, name=etc) Runnix vfat >> partition re-mounted read-only going to runlevel default... >> No Zap hardware - loading ztdummy >> WARNING: Could not open 'kernel/drivers/net/slhc.ko': No such file or >> directory >> WARNING: Could not open 'kernel/drivers/net/ppp_generic.ko': No such >> file or directory >> WARNING: Could not open 'kernel/drivers/net/wan/hdlc.ko': No such file >> or directory >> WARNING: Could not open 'misc/zaptel.ko': No such file or directory >> WARNING: Could not open 'kernel/drivers/char/rtc.ko': No such file or >> directory >> FATAL: Could not open 'misc/ztdummy.ko': No such file or directory >> WiFi not enabled >> udhcpc: SIOCGIFINDEX: No such device >> Configuring sensors... >> WARNING: Could not open 'kernel/drivers/i2c/i2c-core.ko': No such file >> or directory >> WARNING: Could not open 'kernel/drivers/i2c/busses/i2c-isa.ko': No >> such file or directory >> WARNING: Could not open 'kernel/drivers/hwmon/hwmon.ko': No such file >> or directory >> WARNING: Could not open 'kernel/drivers/hwmon/hwmon-vid.ko': No such >> file or directory >> FATAL: Could not open 'kernel/drivers/hwmon/pc87360.ko': No such file >> or directory No sensors found! >> Make sure you loaded all the kernel drivers you need. >> Try sensors-detect to find out which these are. >> Starting syslogd... >> Starting crond... >> WiFi not enabled >> Starting ntpd... >> Starting sshd... >> Starting inetd... >> Starting Asterisk... >> Starting mISDN >> misdn-init.conf already exists on /mnt/kd, skipping config. >> WARNING: Could not open 'kernel/drivers/isdn/capi/kernelcapi.ko': No >> such file or directory >> WARNING: Could not open 'kernel/drivers/isdn/capi/capifs.ko': No such >> file or directory >> FATAL: Could not open 'kernel/drivers/isdn/capi/capi.ko': No such file >> or directory >> FATAL: Could not open 'extra/mISDN_core.ko': No such file or directory >> WARNING: Could not open 'extra/mISDN_core.ko': No such file or >> directory >> FATAL: Could not open 'extra/mISDN_l1.ko': No such file or directory >> WARNING: Could not open 'extra/mISDN_core.ko': No such file or >> directory >> FATAL: Could not open 'extra/mISDN_l2.ko': No such file or directory >> WARNING: Could not open 'extra/mISDN_core.ko': No such file or >> directory >> FATAL: Could not open 'extra/l3udss1.ko': No such file or directory >> WARNING: Could not open 'extra/mISDN_core.ko': No such file or >> directory >> WARNING: Could not open 'kernel/drivers/isdn/capi/kernelcapi.ko': No >> such file or directory >> FATAL: Could not open 'extra/mISDN_capi.ko': No such file or directory >> ----------------------------------------- >> Loading module(s) for your misdn-cards: >> ----------------------------------------- >> /sbin/modprobe --ignore-install hfcmulti type=0x1 protocol=0x2 >> layermask=0xf poll=128 debug=0 >> WARNING: Could not open 'extra/mISDN_core.ko': No such file or >> directory >> FATAL: Could not open 'extra/hfcmulti.ko': No such file or directory >> /sbin/modprobe mISDN_dsp debug=0x0 options=0 poll=128 >> dtmfthreshold=100 >> WARNING: Could not open 'extra/mISDN_core.ko': No such file or >> directory >> FATAL: Could not open 'extra/mISDN_dsp.ko': No such file or directory >> [i] creating device node: /dev/mISDN >> >> WARNING WARNING WARNING >> >> YOU STILL HAVE NOT CHANGED YOUR ASTERISK MANAGER PASSWORD ANYONE THAT >> KNOWS YOU ARE USING ASTLINUX CAN DESTROY YOUR SYSTEM. PLEASE CHANGE >> THIS IN /etc/asterisk/manager.conf IMMEDIATELY! >> >> WARNING WARNING WARNING >> >> FATAL: Could not open 'kernel/fs/binfmt_misc.ko': No such file or >> directory >> mount: mounting none on /proc/sys/fs/binfmt_misc failed: No such >> device >> /etc/runlevels/default/S80mini_httpd: line 20: >> /proc/sys/fs/binfmt_misc/register: No such file or directory Starting >> mini_httpd... >> Starting mini_httpd (HTTP only)... >> cat: can't open '/tmp/mydhcpip': No such file or directory >> >> >> This is backuppbx (Linux i586 2.6.20.21-astlinux) 15:56:11 >> >> backuppbx login: root >> Password: >> backuppbx ~ # lsmod >> Module Size Used by >> backuppbx ~ # >> >> Can anyone help? Has there been development in the 0.6 branch since >> 0.6.7? If so, is it possible to check out specifically 0.6.7, rather >> than just the 0.6 branch? >> >> Thanks >> >> Tom >> >> PS Also tried building from trunk, but, despite my having installed >> git, make immediately fails with "Host tool missing: git". > > ------------------------------------------------------------------------------ > Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day > trial. Simplify your report design, integration and deployment - and focus on > what you do best, core application coding. Discover what's new with > Crystal Reports now. http://p.sf.net/sfu/bobj-july > _______________________________________________ > Astlinux-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/astlinux-users > > Donations to support AstLinux are graciously accepted via PayPal to > [email protected]. ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july _______________________________________________ Astlinux-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [email protected].
