I run it on a 2d3 and it works fine. Can't think why it wouldn't work on a 3d3.
Of course, that assumes you're using the LAN port for your public network (WAN) connection, and wireless (via miniPCI slot) for your internal network... Why go with the 3d3 and not a 2d3? On 11/12/2009 10:00 AM, mancyb...@gmail.com wrote: > Hi All, first post here. > > Any news on that topic ? > > Can someone confirm astlinux on the Alix 3d3 ? > > I am willing to test / support also a beta / trunk version. > > > Thanks and have a nice day, > Mike > > > > >>> The ALIX image was not and probably will not support VGA output. >>> > > > David Kerr wrote: > >> Can you boot into the Alix bios and look for a setting for something >> called MFGPT. Change that setting and try again. I know that this >> setting exists on a 2C3 and does affect booting of Astlinux trunk >> versions, but don't know about 2D3. >> >> Also, Darrick is promising Astlinux 0.7 "real soon now". It might be >> worthwhile waiting for this as there have been many changes. >> >> As you must use VGA display then you should probably stick with the >> geni586 version.... unless you want to build your own from source, in >> which case you could customize the Alix version to point console to VGA >> instead of Serial port, or just use the Alix version with a >> Serial-attached console. >> >> David >> >> >> On Mon, Sep 21, 2009 at 3:01 AM, binary dreamer >> <dreamer.bin...@gm... <mailto:dreamer.bin...@gm...>> wrote: >> >> Hi. >> thanks a lot for your reply. >> i am using the vga output. >> it hangs the boot for ever. >> is there an image for alix 3d3? >> >> >> >> >> On Mon, Sep 21, 2009 at 12:26 AM, Darrick Hartman >> <dhart...@dj... <mailto:dhart...@dj...>> wrote: >> >> I'm not familiar with the 3d3. Are you connected to the serial >> port or >> is there a VGA output? The net5501 image will work on the ALIX >> boards, >> but requires you to change the serial port speed to 19200. If >> you wait >> a little longer, ALIX images are available in trunk which will >> support >> the correct serial port speed for the ALIX boards. >> >> Darrick >> >> binary dreamer wrote: >> >>> hi. i do have an Alix 3d3 from pc engines and i would like to >>> >> try astlinux. >> >>> i have downloaded the geni586 version image and the net4801 >>> >> and net5501. >> >>> all of them failed to start anything at all, apart from the >>> >> net5501 >> >>> which starts and says runnix OK booting the kernel and hangs >>> >> over there. >> >>> any ideas what do i have to do to have a working version of >>> >> astlinux in >> >>> my machine? >>> >> > ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
