Hi Chris
This should point you in the right direction, I think:
http://doc.astlinux.org/userdoc:tt_editable_files
Cheers
Tom
_____
From: Chris Abnett [mailto:[email protected]]
Sent: 09 July 2010 14:14
To: 'AstLinux Users Mailing List'
Subject: [Astlinux-users] Best way to Duplicate Astlinux boxes?
I am trying to find a good and easy way to duplicate astlinux for use as an
installation tool..
I am using Soekris Net5501's..
I thought it would be easy to take the flash and just make a DD of it and id
be set.. when I did this my Ethernet ports come up on the new net5501 as
eth4,eth5,eth6
I can see them being detected but I surmise there is something in the
config somewhere that is written to persistant storage keeping the MACs of
the original.. when I DD's and image and then put the flas on its original
net5501 it worked as expected. eth0,eth1,eth2.. move that flash to the new
board and eth0,eth1,eth2..
Do a fresh install on the new board and get eth0,eth1,eth2 as expected.
Is there some place the ether is stored that I can change on each one? I
really don't want to go through the new install process on each and every
box.. *OR* if I have to replace just the hardware in the field..
-Christopher
------------------------------------------------------------------------------
This SF.net email is sponsored by Sprint
What will you do first with EVO, the first 4G phone?
Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
[email protected].
