I recently upgraded to astlinux-0.7.7 (Asterisk 1.4.40) and I am using a Sangoma A200 w/ FXO ports for my analog calls. I would like to test the OSLEC echo cancellation because I am experiencing a minor echo problem when using this board (no echo problems with calls using my SIP provider). After going through the email archive, I can see that I need to define DAHDIMODS=dahdi_echo_oslec, which I have done via the GUI in user.conf. What else needs to be done to activate the module? I found a reference to configuring /mnt/kd/dahdi/system.conf, but I'm not sure what needs to be done there. The current contents of my system.conf file follow:
loadzone=us defaultzone=us #Sangoma A200 [slot:14 bus:0 span:1] <wanpipe1> fxsks=1 # fxo port fxsks=2 # fxo port fxoks=3 # fxs port fxoks=4 # fxs port Any advice would be appreciated! -tm ------------------------------------------------------------------------------ Colocation vs. Managed Hosting A question and answer guide to determining the best fit for your organization - today and in the future. http://p.sf.net/sfu/internap-sfd2d _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
