----- Original Message ----- > I have not tested it, but an alternative approach to create a 4 x FXO > SIP gateway might be by using the BlackBochs SBC. > > http://www.rockbochs.com/products/blackbochs-sbc > > Not cheap at a total cost of $100 per FXO port, but it runs AstLinux > so the learning curve should be near zero. It could be a dedicated > SIP-FXO gateway to another AstLinux box, or the complete Asterisk > solution. > > Question, which AstLinux firmware is best for the BlackBochs SBC, the > "alix" board ? Does it's serial port default to 38400 baud like the > Alix ? > > I wonder if the Audiocodes provides better echo cancellation then > what OSLEC could provide with the BlackBochs SBC. >
Greetings- Thanks for mentioning our board! The serial port on our Blackbochs SBC runs at 115200,8,n,1. The i586 w/ serial image works just fine, but you need to change the serial console baud to match Astlinux after boot for console access. Of course, if you don't care to see the BIOS in action, you can just leave it at the Astlinux default baud all the time. The alix image is compiled specifically for the Geode LX and may give better performance, but I have not tested this recently. Tim Nelson Systems/Network Support Rockbochs Inc. (218)727-4332 x105 ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Astlinux-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [email protected].
