Thank bunch Lonnie and James. You guys the best. I am all over Zabbix :-)
________________________________
From: Lonnie Abelbeck <[email protected]>
To: AstLinux Users Mailing List <[email protected]>
Cc: Ionel Chila <[email protected]>
Sent: Saturday, June 9, 2012 2:00 PM
Subject: Re: [Astlinux-users] Monitoring Astlinux/Asterisk & Hardware
Ionel,
Recall there was a very recent discussion on this:
[Astlinux-users] AstLinux Monitoring
http://sourceforge.net/mailarchive/message.php?msg_id=29312209
Zabbix is built by default in AstLinux...
Zabbix Agent (daemon) v1.8.10 (revision 24303) (28 December 2011)
Zabbix is supported with manually specifying user.conf variables.
Setting ZABBIX_SERVER is enough to get it running with defaults.
--
## Zabbix Agent Daemon
## Zabbix is enabled if ZABBIX_SERVER is defined.
#ZABBIX_SERVER="" # Comma/space separated list of IP addresses or
hostnames for zabbix servers
#ZABBIX_SERVER_PORT="10051" # TCP port used for retrieving/sending active
check data
#ZABBIX_HOSTNAME="" # Unique, case sensitive hostname, required for
active checks
#ZABBIX_LISTENPORT="10050" # TCP port that zabbix_agentd listens on locally
#ZABBIX_STARTAGENTS="3" # Number of pre-forked instances of
zabbix_agentd, must be between 1-16
#ZABBIX_DEBUGLEVEL="3" # "0" is no debug, "1" is critical, "2" is
errors, "3" is warnings, "4" is full debugging
#ZABBIX_TIMEOUT="3" # Processing limit in seconds, must be between
1-30
--
Then you need the "server" running elsewhere.
http://www.zabbix.com/
That is all I know about zabbix. :-)
Lonnie
PS: A far as Asterisk monitoring goes, Network tab -> Safe Asterisk & SIP
Monitoring: works well for me. The "Monitor SIP Trunks:" and "Monitor SIP
Peers:" web interface fields define the MONITOR_ASTERISK_SIP_TRUNKS and
MONITOR_ASTERISK_SIP_PEERS variables as described below. Peers need
qualify=yes.
## Asterisk SIP Monitor uses the same email NOTIFY settings as with Safe
Asterisk.
##
## Example: "sip show registry"
## chiv1.voippath.com:5060 xxxx 135 Registered Sat, 21 May 2011
10:21:11
## inbound18.bigtel.net:5060 xxxx 45 Registered Sat, 21 May 2011
10:22:42
##
#MONITOR_ASTERISK_SIP_TRUNKS="chiv1.voippath.com inbound18.bigtel.net"
##
## Example: "sip show peers"
## voippath/homer-simpson 64.x.x.xx 5060 OK (67 ms)
## bigtel-inbound/homer1 64.x.x.xx 5060 Unmonitored
## bigtel-outbound/homer1 64.x.x.xx 5060 OK (42 ms)
##
#MONITOR_ASTERISK_SIP_PEERS="voippath bigtel-outbound"
On Jun 9, 2012, at 1:30 PM, Ionel Chila wrote:
> What are you guys using to monitor the "health" of you asterisk / astlinux
> install as well the hardware (drive space, cpu utilization, memory, etc,
> etc)? Does Astlinux supports snmp? What kind of setup do you guys have? Can
> anyone share their configuration please?
>
> Thanks
> ------------------------------------------------------------------------------
> Live Security Virtual Conference
> Exclusive live event will cover all the ways today's security and
> threat landscape has changed and how IT managers can respond. Discussions
> will include endpoint security, mobile security and the latest in malware
> threats.
> http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/_______________________________________________
> Astlinux-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/astlinux-users
>
> Donations to support AstLinux are graciously accepted via PayPal to
> [email protected].
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
[email protected].
