Hi MIchael,
No, Dynamic DNS is only for the EXT interface.
I don't see how this is a problem, the phone's VLAN's are under your control,
correct ?
Network -> Network Services: { Configure DNS Hosts }
can define a DNS entry for your LAN1 gateway address, who's scope would only be
local to AstLinux.
Normally there are two scenarios:
1) AstLinux is the primary router at the edge, all services are derived from
AstLinux. AstLinux rules ! :-)
2) AstLinux plugs into an existing network, the EXT interface is obtained from
the existing network, all the rest of the AstLinux interfaces LAN1, LAN2, etc.
drive the phones, PoE switches, wireless AP's, etc. .
Of couse there can be a hybrid of #1 and #2, but #2 provides the most plug and
play install approach to an existing network, keeping all pre-existing (known
and unknown) IP's isolated from your AstLinux system.
Lonnie
On Nov 27, 2012, at 10:13 PM, Michael Knill wrote:
> Hi group
>
> Just out of interest. Is it possible to advertise more than one interface
> with inadyn. I want to advertise EXT and LAN1 interface to Dyn (different
> subdomains).
> This is so I can distribute a full plug and play system where the phones are
> on a dedicated VLAN and the data VLAN obtains its address via DHCP. This
> means that User Admin, soft phones and Click2Call can use a fixed URL and I
> don't need to worry about trying to find a spare address on the customers
> network.
>
> Regards
> Michael Knill
------------------------------------------------------------------------------
Keep yourself connected to Go Parallel:
INSIGHTS What's next for parallel hardware, programming and related areas?
Interviews and blogs by thought leaders keep you ahead of the curve.
http://goparallel.sourceforge.net
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
[email protected].
