Hi group Ok I think I am missing something here as it seems simple but it is not working and I am pulling out my hair.
I have an Astlinux appliance connected directly to the Public network where I am doing NAT(PAT). The customer wants to protect their data LAN by a Cisco ASA firewall so I have placed this behind Astlinux on a separate interface and set up a route using ip route pointing to the firewall outside interface. All NAT is turned off in the firewall and I am not getting any errors displayed for both boxes but I am still not getting any return packets on the firewall LAN. Short of port monitoring the interface to the firewall, I suspect the Astlinux NAT is not forwarding to the firewall's LAN subnet. Do I need to do anything to make this happen? Any other ideas? Regards Michael Knill ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
