Hi Ionel, > I can confirm that everything works perfect after this upgrade Sir.
Excellent! > Should I stay on this version or reverse back and wait for the official > release? I am personally running astlinux-1.5-5689-b4e39c ... there are no issues that I am currently aware of. You can always revert later if you see issues. BTW, the official astlinux-1.5.0 release will most likely be 8-10 weeks away. Lonnie > On Dec 30, 2022, at 2:10 PM, Ionel Chila <ionelch...@mac.com> wrote: > > Lonnie, > > First of all Merry Christmas and Happy New Year. As always you’re being > awesome and thanks for thinking of us through this upgrade process as well > thanks for working so hard through your holidays. > > I can confirm that everything works perfect after this upgrade Sir. Should I > stay on this version or reverse back and wait for the official release? > > THANKS again Sir > > > > <Screenshot 2022-12-30 at 2.07.54 PM.png><Screenshot 2022-12-30 at 2.06.55 > PM.png><Screenshot 2022-12-30 at 2.04.49 PM.png> > > > > > >> On Dec 30, 2022, at 1:18 PM, Lonnie Abelbeck <li...@lonnie.abelbeck.com> >> wrote: >> >> Hi ... specially Ionel and Gonzalo (or others) for DAHDI testing. >> >> You previously tested the AstLinux 1.4.x series with DAHDI 3.1.0, at that >> time we patched dahdi-linux to include PCI card support for: wctdm24xxp, >> wctdm and wcfxo >> >> Gonzalo indicated it worked: >> -- >>> ||||| >>> | A | Release: astlinux-1.4-4806-e5d33e - Asterisk 13.34.0 >>> | s | Host Name: >>> | t | Last Boot: 2020-08-30 12:38 >>> | L | Linux: 4.19.140-astlinux x86_64 >>> | i | CPU: Intel Atom N2800 (4x) @ 1866 MHz >>> | n | RAM: 1983 MB >>> | u | Board Type: genx86_64 >>> | x | Hardware: Generic x86_64 >>> ||||| >>> >>> >>> [ 24.405610] dahdi: Version: 3.1.0 >>> [ 24.409381] dahdi: Telephony Interface Registered on major 196 >>> [ 24.435136] No freshmaker chip >>> [ 25.149448] Module 0: Installed -- AUTO FXO (SPAIN mode) >>> [ 25.635354] Module 1: Installed -- AUTO FXS/DPO >>> [ 25.719428] Excessive leakage detected on module 2: 1 volts (03) after >>> 34 ms >>> [ 25.719490] ProSLIC module 2 failed leakage test. Check for short >>> circuit >>> [ 26.126341] Module 2: Installed -- AUTO FXS/DPO >>> [ 26.126752] Module 3: Not installed >>> [ 26.136305] Found a Wildcard TDM: Wildcard TDM400P REV I (3 modules) >>> [ 26.182717] dahdi_echocan_oslec: Registered echo canceler 'OSLEC' >>> [ 44.144753] ioctl: Start OnHookTrans, card 1 >>> [ 45.064225] ioctl: Start OnHookTrans, card 2 >> -- >> >> >> It is more than 2 years later and the AstLinux Team is working on the >> AstLinux 1.5.x series with DAHDI 3.2.0 and Linux Kernel 5.10.y, we have >> included the same patches to maintain PCI card support for: wctdm24xxp, >> wctdm and wcfxo >> >> While the Linux Kernel 5.10.y drivers build properly, we have no way to test >> if things still work using those cards. >> >> >> It now needs testing ... there is a new Pre-Release Version: >> astlinux-1.5-5689-b4e39c >> >> Info: >> https://www.astlinux-project.org/dev.html >> >> With the console, use the CLI to upgrade via the appropriate Pre-Release >> Repository URL for your Asterisk version. >> >> If you want to, revert back to your previous image with "upgrade-run-image >> revert" and "kernel-reboot" CLI commands. >> >> In theory, it should just work. >> >> Please post your test results here. >> >> Thanks! >> >> Lonnie >> > _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.