Hi Michael (AU), I recently purchased a "Protectli VP2430 CPU N150 NIC x4" [1]
Purchased directly from Protectli ($299 USD), with the coreboot+UEFI BIOS. I tested with AstLinux 1.5.10. both 2.5“ SATA SSD and M.2 2280 NVMe, as well as genx86_64-serial and genx86_64 builds. All worked well. BTW, coreboot has come a long way from the early PC Engines days. The Protectli VP2430 has now replaced my 7 year old Qotom Q530G6 Core i3 box as my edge router, VPN and PBX. So far, so good. With a 2.5“ SATA SSD installed, serial console, here is a little info... (The NICs do not have a registered MAC vendor, only a generic one) # mac2vendor 64:62:66 IEEE Registration Authority (NVMe does not show as it is not installed) # lspci 00:00.0 Host bridge: Intel Corporation Device 461c 00:02.0 VGA compatible controller: Intel Corporation Alder Lake-N [Intel Graphics] 00:0d.0 USB controller: Intel Corporation Device 464e 00:14.0 USB controller: Intel Corporation Alder Lake-N PCH USB 3.2 xHCI Host Controller 00:14.2 RAM memory: Intel Corporation Alder Lake-N PCH Shared SRAM 00:15.0 Serial bus controller: Intel Corporation Device 54e8 00:17.0 SATA controller: Intel Corporation Device 54d3 00:19.0 Serial bus controller: Intel Corporation Device 54c5 00:1a.0 SD Host controller: Intel Corporation Device 54c4 00:1c.0 PCI bridge: Intel Corporation Device 54b9 00:1c.2 PCI bridge: Intel Corporation Device 54ba 00:1c.3 PCI bridge: Intel Corporation Device 54bb 00:1c.6 PCI bridge: Intel Corporation Device 54be 00:1f.0 ISA bridge: Intel Corporation Alder Lake-N PCH eSPI Controller 00:1f.3 Audio device: Intel Corporation Alder Lake-N PCH High Definition Audio Controller 00:1f.4 SMBus: Intel Corporation Device 54a3 00:1f.5 Serial bus controller: Intel Corporation Device 54a4 01:00.0 Ethernet controller: Intel Corporation Ethernet Controller I226-V (rev 04) 02:00.0 Ethernet controller: Intel Corporation Ethernet Controller I226-V (rev 04) 03:00.0 Ethernet controller: Intel Corporation Ethernet Controller I226-V (rev 04) 04:00.0 Ethernet controller: Intel Corporation Ethernet Controller I226-V (rev 04) # sensors coretemp-isa-0000 Adapter: ISA adapter Package id 0: +36.0 C (high = +105.0 C, crit = +105.0 C) Core 0: +35.0 C (high = +105.0 C, crit = +105.0 C) Core 1: +35.0 C (high = +105.0 C, crit = +105.0 C) Core 2: +35.0 C (high = +105.0 C, crit = +105.0 C) Core 3: +35.0 C (high = +105.0 C, crit = +105.0 C) Lonnie [1] https://doc.astlinux-project.org/userdoc:board_protectli_vp2430 > On May 4, 2025, at 7:59 PM, Michael Knill <michael.kn...@ipcsolutions.com.au> > wrote: > > Hi All > There is new Protecli hardware (https://protectli.com/product/v1210/) which > I was wondering if it was compatible with Astlinux? I would be wanting to use > the onboard 32G eMMC. > Regards > Michael Knill > Managing Director > D: +61 2 6189 1360 > P: +61 2 6140 4656 > E: michael.kn...@ipcsolutions.com.au > W: ipcsolutions.com.au > <image001.png>Smarter Business Communications > _______________________________________________ > Astlinux-users mailing list > Astlinux-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/astlinux-users > > Donations to support AstLinux are graciously accepted via PayPal to > pay...@krisk.org. _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
