Michal, do you know how to enable debug? Because I haven't that file, the directory with some other files exists, but there is not one called "ani_enable". I suspect some debugging option not enabled on firmware/driver.
> El 16/7/2015, a las 2:42, Michal Kazior <[email protected]> escribió: > >> On 15 July 2015 at 21:31, Fernando S <[email protected]> wrote: >> Same suggestion was posted on Openwrt forum (disable >> disassoc_low_ack), I'll try it, do some stress test and come back with >> results. >> >> Here are two links to Openwrt forum threads related to this problem: >> >> https://forum.openwrt.org/viewtopic.php?id=43188 >> https://forum.openwrt.org/viewtopic.php?pid=228738 >> >> And two tickets with some more information: >> >> https://dev.openwrt.org/ticket/12372 > > This seems to be related to ANI. I guess you could try start the > ath10k AP and issue: > > echo 0 > /sys/kernel/debug/ieee80211/phy*/ath10k/ani_enable > > You can check the current state of the setting by reading the file obviously. > > >> https://dev.openwrt.org/ticket/15464 > > This one is related to software A-MPDU support in ath9k. ath10k > offloads Tx aggregation to firmware so this bug doesn't really apply. > > > Michał _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
