Sven Eckelmann <sven.eckelm...@open-mesh.com> writes: > the QCA9887 chip is similar to the QCA988x chips. But it requires a special > firmware and uses a different calibration data source. Unfortunately, no > working firmware currently exists. But it is possible to create a semi working > one by binary patching the current version.
So what works and what doesn't? > # download new fw + set > ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX+ATH10K_FW_FEATURE_NO_P2P > curl -o firmware-5.bin > https://raw.githubusercontent.com/kvalo/ath10k-firmware/master/QCA9887/firmware-5.bin_10.2.3.31.7-1 > echo -en '\x0c'|dd conv=notrunc bs=1 seek=231112 of=firmware-5.bin > mkdir -p /lib/firmware/ath10k/QCA9887/hw1.0/ > mv firmware-5.bin /lib/firmware/ath10k/QCA9887/hw1.0/firmware-5.bin > > I am also guessing that ATH10K_FW_FEATURE_SUPPORTS_SKIP_CLOCK_INIT should > also be set but this would require a ie_len of 2. I can upload a new version. So I need to add these flags: ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX ATH10K_FW_FEATURE_NO_P2P ATH10K_FW_FEATURE_SUPPORTS_SKIP_CLOCK_INIT Anything else? > The QCA9887 support should be considered really experimental because we don't > have any information how the interface to firmware actually looks like. The > workarounds mentioned above were just implemented because we saw the firmware > crashing and then guessed the most plausible reason for it. Should we add a warning message to ath10k that the QCA9887 support is experimental? That way users don't need to wonder why there are so many problems. There were some conflicts in patch 1. I fixed those now and pushed the patches to the pending branch for further testing: https://git.kernel.org/cgit/linux/kernel/git/kvalo/ath.git/log/?h=master-pending Unfortunately I don't have QCA9887 myself so I can't test these myself. I hope I didn't break anything. -- Kalle Valo _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k