On Mittwoch, 8. Februar 2017 11:40:07 CET Sven Eckelmann wrote: > Hi, > > I've just noticed that the numChain in (ath10k/)QCA4019/hw1.0/board-2.bin is > wrong in the bus=ahb,bmi-chip-id=0,bmi-board-id=16 and > bus=ahb,bmi-chip-id=0,bmi-board-id=17 from the linux-firmware and > ath10k-firmware repository. It is 0x4 for a 2x2 device. This was fixed in > the QSDK by commit 171b9607fb8cc694ed469a4e29c91af9d92f2971 [1]. It is not > known to me whether this has an effect when the pre-cal data says that the > device should use numChain 2.
I was informed that the numChain information is part of the pre-calibration data. So it is most likely only relevant when you calibrate your board or don't have pre-calibration data. Kind regards, Sven
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k