Thank you for your reply.
OK, I know.
If so, will the bit-rate be lower if all (the station side)TIDs are closed?
Thanks.
-----
Kim Kwang Min
Mobile +82 010-5521-6393
Mail gwond...@nimbus.kr
>-----Original Message-----
>From: "Ben Greear"<gree...@candelatech.com>
>To: "Kwang Min Kim"<gwond...@nimbus.kr>;
>Cc: <ath10k@lists.infradead.org>; <moham...@qti.qualcomm.com>;
>Sent: 2017-02-23 (목) 23:43:00
>Subject: Re: who care of addba/delba in ath10k?
>
>Well, block-ack seems to work for me, so I assume it is working properly...
>
>Thanks,
>Ben
>
>On 02/21/2017 08:39 PM, Kwang Min Kim wrote:
>> Thank you for your reply.
>>
>> I will ask another question...
>>
>> When debugging from "ath10k HTT", I usually see ADDBA requests coming when
>> "associated" is finish.
>>
>> But very rarely, after "associated" completion, I could see the following
>> behavior.
>>
>> Associated -> ADDBA -> DELBA -> ADDBA -> DELBA
>>
>> Is this normal case?
>>
>> Thanks.
>>
>> -----
>>
>> Kim Kwang Min
>>
>> Mobile +82 010-5521-6393
>> Mail gwond...@nimbus.kr
>>
>>
>>
>>
>>
>> -----Original Message-----
>> From: "Ben Greear"<gree...@candelatech.com>
>> To: "Shajakhan, Mohammed Shafi (Mohammed Shafi)"<moham...@qti.qualcomm.com>;
>> "ath10k@lists.infradead.org"<ath10k@lists.infradead.org>; >"KwangMin
>> Kim"<kim25...@naver.com>;
>> Cc: "gwond...@nimbus.kr"<gwond...@nimbus.kr>;
>> Sent: 2017-02-21 (화) 02:50:44
>> Subject: Re: who care of addba/delba in ath10k?
>>
>> Yes, it is in firmware.
>>
>> Thanks,
>> Ben
>>
>> On 02/20/2017 06:37 AM, Shajakhan, Mohammed Shafi (Mohammed Shafi) wrote:
>>> I think that ath10k's addba / delba is doing firmware. Is this right?
>>>
>>> [shafi]
>>> http://lxr.free-electrons.com/source/drivers/net/wireless/ath/ath10k/debugfs_sta.c#L144
>>> yes WMI command is sent to f/w
>>> _______________________________________________
>>> ath10k mailing list
>>> ath10k@lists.infradead.org
>>> http://lists.infradead.org/mailman/listinfo/ath10k
>>>
>>
>>
>>
>>
>> _______________________________________________
>> ath10k mailing list
>> ath10k@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/ath10k
>>
>
>--
>Ben Greear <gree...@candelatech.com>
>Candela Technologies Inc http://www.candelatech.com
>
>
>
>
>-----Original Message-----
>From: "KwangMin Kim"<kim25...@naver.com>
>To: <ath10k@lists.infradead.org>;
>Cc: <gwond...@nimbus.kr>;
>Sent: 2017-02-19 (일) 17:30:41
>Subject: who care of addba/delba in ath10k?
>
>I think that ath10k's addba / delba is doing firmware. Is this right?
>
>And I have another question.
>
>If wmm is on, should TID '0' in agg_status (debugfs on mac80211) always be on?
>
>Thanks.
>
>-----
>
>Kwang-Min Kim(kim25...@naver.com)
>
>+82 10-5521-6393
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
