Board Data File (BDF) is loaded upon driver boot-up procedure. The right
board data file is identified on QCA4019 using bus, bmi-chip-id and
bmi-board-id.
The problem, however, can occur when the (default) board data file cannot
fulfill with the vendor requirements and it is necessary to use a different
board data file.
This problem was solved for SMBIOS by adding a special SMBIOS type 0xF8.
Something similar has to be provided for systems without SMBIOS but with
device trees. No solution was specified by QCA and therefore a new one has
to be found for ath10k.
The device tree requires addition strings to define the variant name
wifi@a000000 {
status = "okay";
qcom,ath10k-calibration-variant = "RT-AC58U";
};
wifi@a800000 {
status = "okay";
qcom,ath10k-calibration-variant = "RT-AC58U";
};
This would create the boarddata identifiers for the board-2.bin search
* bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=RT-AC58U
* bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=RT-AC58U
Cc: Waldemar Rymarkiewicz <ext.waldemar.rymarkiew...@tieto.com>
Signed-off-by: Sven Eckelmann <sven.eckelm...@openmesh.com>
---
Cc: Christian Lamparter <chunk...@googlemail.com>
Cc: John Crispin <j...@phrozen.org>
Cc: Simon Wunderlich <simon.wunderl...@openmesh.com>
v2:
- re-added missing chunk for ath10k_core_create_board_name again
---
.../bindings/net/wireless/qcom,ath10k.txt | 3 ++
drivers/net/wireless/ath/ath10k/core.c | 44 ++++++++++++++++++----
2 files changed, 40 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
index 74d7f0af209c..60f87439308e 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
@@ -41,6 +41,9 @@ Optional properties:
- qcom,msi_addr: MSI interrupt address.
- qcom,msi_base: Base value to add before writing MSI data into
MSI address register.
+- qcom,ath10k-calibration-variant: string to search for in the board-2.bin
+ variant list with the same bus bmi-chip-id,
+ and bmi-board-id
- qcom,ath10k-calibration-data : calibration data + board specific data
as an array, the length can vary between
hw versions.
diff --git a/drivers/net/wireless/ath/ath10k/core.c
b/drivers/net/wireless/ath/ath10k/core.c
index 0a8e29e9a0eb..8b5f8f22f89e 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -779,6 +779,31 @@ static int ath10k_core_check_smbios(struct ath10k *ar)
return 0;
}
+static int ath10k_core_check_dt(struct ath10k *ar)
+{
+ struct device_node *node;
+ const char *variant;
+
+ /* don't overwrite the smbios entry */
+ if (ar->id.bdf_ext[0] != '\0')
+ return 0;
+
+ node = ar->dev->of_node;
+ if (!node)
+ return -ENOENT;
+
+ of_property_read_string(node, "qcom,ath10k-calibration-variant",
+ &variant);
+ if (!variant) {
+ ath10k_dbg(ar, ATH10K_DBG_BOOT, "DT bdf variant name not
found.\n");
+ return -ENODATA;
+ }
+
+ strscpy(ar->id.bdf_ext, variant, sizeof(ar->id.bdf_ext));
+
+ return 0;
+}
+
static int ath10k_download_and_run_otp(struct ath10k *ar)
{
u32 result, address = ar->hw_params.patch_load_addr;
@@ -1145,19 +1170,20 @@ static int ath10k_core_create_board_name(struct ath10k
*ar, char *name,
/* strlen(',variant=') + strlen(ar->id.bdf_ext) */
char variant[9 + ATH10K_SMBIOS_BDF_EXT_STR_LENGTH] = { 0 };
+
+ if (ar->id.bdf_ext[0] != '\0')
+ scnprintf(variant, sizeof(variant), ",variant=%s",
+ ar->id.bdf_ext);
+
if (ar->id.bmi_ids_valid) {
scnprintf(name, name_len,
- "bus=%s,bmi-chip-id=%d,bmi-board-id=%d",
+ "bus=%s,bmi-chip-id=%d,bmi-board-id=%d%s",
ath10k_bus_str(ar->hif.bus),
ar->id.bmi_chip_id,
- ar->id.bmi_board_id);
+ ar->id.bmi_board_id, variant);
goto out;
}
- if (ar->id.bdf_ext[0] != '\0')
- scnprintf(variant, sizeof(variant), ",variant=%s",
- ar->id.bdf_ext);
-
scnprintf(name, name_len,
"bus=%s,vendor=%04x,device=%04x,subsystem-vendor=%04x,subsystem-device=%04x%s",
ath10k_bus_str(ar->hif.bus),
@@ -2221,7 +2247,11 @@ static int ath10k_core_probe_fw(struct ath10k *ar)
ret = ath10k_core_check_smbios(ar);
if (ret)
- ath10k_dbg(ar, ATH10K_DBG_BOOT, "bdf variant name not set.\n");
+ ath10k_dbg(ar, ATH10K_DBG_BOOT, "SMBIOS bdf variant name not
set.\n");
+
+ ret = ath10k_core_check_dt(ar);
+ if (ret)
+ ath10k_dbg(ar, ATH10K_DBG_BOOT, "DT bdf variant name not
set.\n");
ret = ath10k_core_fetch_board_file(ar);
if (ret) {
--
2.11.0
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
