On 09/11/2017 03:03 PM, Luka Karinja wrote: > > > > > Hello. I'm trying to get a M.2 QCA6174 working on my MSI B150Mortar > > > motherboard. i did try all the various firmware versions from > > > https://github.com/kvalo/ath10k-firmware more or less with the same > > > errors as bellow > > > > > > in dmesg i get: failed to fetch board data for > > > bus=pci,vendor=168c,device=003e,subsystem-vendor=0000,subsystem-device=0000 > > > from ath10k/QCA6174/hw3.0/board-2.bin > > > > > > when trying to get the device up i get: RTNETLINK answers: Resource > > > temporarily unavailable > > > > > > [ 2026.219245] ath10k_pci 0000:05:00.0: pci irq msi oper_irq_mode 2 > > > irq_mode 0 reset_mode 0 > > > [ 2026.477510] ath10k_pci 0000:05:00.0: qca6174 hw3.2 target 0x05030000 > > > chip_id 0x00340aff sub 0000:0000 > > > [ 2026.477517] ath10k_pci 0000:05:00.0: kconfig debug 0 debugfs 1 tracing > > > 0 dfs 0 testmode 0 > > > [ 2026.478640] ath10k_pci 0000:05:00.0: firmware ver > > > WLAN.RM.4.4.1-00026-QCARMSWP-1 api 6 features wowlan,ignore-otp,raw-mode > > > crc32 7b90c3fc > > > [ 2026.542196] ath10k_pci 0000:05:00.0: failed to fetch board data for > > > bus=pci,vendor=168c,device=003e,subsystem-vendor=0000,subsystem-device=0000 > > > from ath10k/QCA6174/hw3.0/board-2.bin > > > > > > > Not sure what kernel and driver do you have? > > > > This should already fix this case - > > https://patchwork.kernel.org/patch/9486941/ > > > > I have kernel 4.12.10 (Arch linux) i did try with ath10k WLAN.RM.2.4, 4.4, > 4.4.1 firmware >
ok, then it should be happening, would you mind enable the ATH10K_DBG_BOOT and share logs? https://wireless.wiki.kernel.org/en/users/drivers/ath10k/debug -- Ryan Hsu _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
