Please figure out how to enable more verbose debugging with wpa_supplicant and send the supplicant logs to the list. I don't know exactly how to do this in LEDE but probably google can find something.
Thanks, Ben On 09/15/2017 01:30 PM, Stone, Aaron wrote:
Hi, I'm attempting to get the QCA9984 radio working with the ath10k driver as a client. I've already been successful getting it running in AP mode. When I attempt to put it in client mode LEDE shows 0% Radio Wireless is disabled or not associated. I've already posted a thread on LEDE forum showing some of the logs https://forum.lede-project.org/t/cant-add-wave2-qca9984-radio-in-client-mode/6649 Through compiling in a few well-placed debug messages I've been able to obtain some additional info. Fri Jan 30 05:52:53 1970 daemon.notice netifd: Interface 'wwan' is disabled Fri Jan 30 05:52:55 1970 daemon.notice netifd: radio0 (3222): AMS iw phy0 info (null) Fri Jan 30 05:52:55 1970 daemon.notice netifd: radio0 (3222): AMS iw reg get (null) Fri Jan 30 05:52:55 1970 daemon.notice netifd: radio0 (3222): AMS iw phy phy0 set antenna_gain 0 (null) Fri Jan 30 05:52:55 1970 daemon.notice netifd: radio0 (3222): AMS iw phy phy0 set distance 0 (null) Fri Jan 30 05:52:55 1970 daemon.notice netifd: radio0 (3222): command failed: Not supported (-95) Fri Jan 30 05:52:55 1970 daemon.notice netifd: radio0 (3222): AMS iw phy phy0 interface add wlan0 type managed (null) Fri Jan 30 05:52:55 1970 daemon.notice netifd: radio0 (3222): AMS iw wlan0 set power_save off (null) Fri Jan 30 05:52:58 1970 kern.info kernel: [ 858.837891] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready From there it also calls wpa_supplicant with a failure as well but this wasn't compiled into the off the shelf LEDE. Currently my best guess is that IW is have a problem with the driver. I'm a bit new to the ath10K driver but I'm trying to learn as much about it as possible. I don't know all the steps that Need to be taken in order to get the radio working in client mode but if anyone can point me in the right direction It would be much appreciated. Thanks Aaron CONFIDENTIAL NOTE: This e-mail and any attachments may be confidential and protected by legal privilege. If you are not the intended recipient, be aware that you are hereby notified that any unauthorized review, use, disclosure, dissemination, distribution, or copying of this communication, or any of its contents, is strictly prohibited. If you have received this email in error, please notify us immediately by replying to the sender and deleting this copy and the reply from your system. Thank you for your cooperation. EXPORT CONTROLLED DOCUMENT This document may contain information whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751 Et Seq.) or the International Traffic in Arms Regulation (ITAR) under the Export Administration Act of 1979, as amended, (Title 50, U.S.C., App. 2401, Et. Seq.). Violations to these export laws are subject to severe criminal penalties All technical data forwarded by VT Miltope to its suppliers is EXPORT CONTROLLED. Suppliers shall not disclose technical data in any form to a Foreign Person (including foreign persons employed by the Supplier), or export the technical data from the United States without U.S. Government authority and the written authorization of VT Miltope. _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
-- Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
