Wen Gong <wg...@codeaurora.org> writes: > On 2018-07-26 19:45, Toke Høiland-Jørgensen wrote: >> Wen Gong <wg...@codeaurora.org> writes: >> >>> Upstream kernel has an interface to help adjust sk_pacing_shift to >>> help >>> improve TCP UL throughput. >>> The sk_pacing_shift is 8 in mac80211, this is based on test with 11N >>> WiFi chips with ath9k. For QCA6174/QCA9377 PCI 11AC chips, the 11AC >>> VHT80 TCP UL throughput testing result shows 6 is the optimal. >>> Overwrite the sk_pacing_shift to 6 in ath10k driver. >> >> When I tested this, a pacing shift of 8 was quite close to optimal as >> well for ath10k. Why are you getting different results? > > the default value is still 8 in the patch: > https://patchwork.kernel.org/patch/10545361/ > > In my test, pacing shift 6 is better than 8. > The test is for ath10k/11AC WiFi chips. > Test result is show in the commit logs before. >> >>> Tested with QCA6174 PCI with firmware >>> WLAN.RM.4.4.1-00109-QCARMSWPZ-1, but this will also affect QCA9377 >>> PCI. >>> It's not a regression with new firmware releases. >>> >>> There have 2 test result of different settings: >>> >>> ARM CPU based device with QCA6174A PCI with different >>> sk_pacing_shift: >>> >>> sk_pacing_shift throughput(Mbps) CPU utilization >>> 6 500(-P5) ~75% idle, Focus on CPU1: ~14%idle >>> 7 454(-P5) ~80% idle, Focus on CPU1: ~4%idle >>> 8 288 ~90% idle, Focus on CPU1: ~35%idle >>> 9 ~200 ~92% idle, Focus on CPU1: ~50%idle >> >> Your tests do not include latency values; please try running a test >> that >> also measures latency. The tcp_nup test in Flent (https://flent.org) >> will do that, for instance. Also, is this a single TCP flow? >> > > It is not a single TCP flow, it is 500Mbps with 5 flows. > > below is result show in commit log before: > 5G TCP UL VTH80 on X86 platform with QCA6174A PCI with sk_packing_shift > set to 6: > > tcp_limit_output_bytes throughput(Mbps) > default(262144)+1 Stream 336 > default(262144)+2 Streams 558 > default(262144)+3 Streams 584 > default(262144)+4 Streams 602 > default(262144)+5 Streams 598 > changed(2621440)+1 Stream 598 > changed(2621440)+2 Streams 601
This is useless without latency numbers. The whole point of sk_pacing_shift is to control the tradeoff between latency and throughput. You're only showing the throughput, so it's impossible to judge if setting the pacing shift to 6 is right (and from your results I suspect the sweet spot is actually 7). -Toke _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k