Skorpy <sko...@darmstadt.ccc.de> writes: > This is a set of board.bin files for the ZyXEL WRE6606 Router [0], > which I wish to be added to the ath10k-firmware repository. > > > As per the current "Submitting board files" guidelines [1]: > > * description for what hardware this is: > > - it is a IPQ4018 based board [0] > - one QCA40xx radio is used as 2.4GHz radio > - one QCA40xx radio is used as 5GHz radio > > * origin of the board file (did you create it yourself or where you > downloaded) > > - All files were extracted from official vendor firmware which was on > the device from the factory > - Boardfiles also included in the vendor firmware image of the NBG6617 > > * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) > - qca4019 hw1.0 > + bus=ahb,bmi-chip-id=0,bmi-board-id=24,variant=ZyXEL-WRE6606 > > + bus=ahb,bmi-chip-id=0,bmi-board-id=25,variant=ZyXEL-WRE6606 > > * sha256sum of each new board file to add > - bus=ahb,bmi-chip-id=0,bmi-board-id=24,variant=ZyXEL-WRE6606 > has sha256sum: > 1aeae4981217b63883e20ecbab6380aff404985485bf1e881fb0fc874f2a0883 > > - bus=ahb,bmi-chip-id=0,bmi-board-id=25,variant=ZyXEL-WRE6606 > has sha256sum: > 469e81fd2593cba442c0d810ce92309bb92eaa42bbddbbbf4ec051fabd345ecf > > * attach the actual board file (board.bin) > > - The name of the files are equal to the id string in the board-2.bin > (minus the ".bin") > > Kind regards, > Magnus Frühling > > [0] <https://wikidevi.com/wiki/ZyXEL_WRE6606> > > [1] <https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>
I don't see any board files, did you forget to attach them or is it a problem on my end? -- Kalle Valo _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k