ath10k_bmi_write32 and ath10k_bmi_read32 can fail. The fix
checks their statuses to avoid potential undefined behaviors.

Signed-off-by: Kangjie Lu <k...@umn.edu>
---
 drivers/net/wireless/ath/ath10k/core.c | 40 ++++++++++++++++++++------
 1 file changed, 31 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c 
b/drivers/net/wireless/ath/ath10k/core.c
index 835b8de92d55..1bb586f0040e 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -629,13 +629,20 @@ static void ath10k_send_suspend_complete(struct ath10k 
*ar)
        complete(&ar->target_suspend);
 }
 
-static void ath10k_init_sdio(struct ath10k *ar)
+static int ath10k_init_sdio(struct ath10k *ar)
 {
+       int ret;
        u32 param = 0;
 
-       ath10k_bmi_write32(ar, hi_mbox_io_block_sz, 256);
-       ath10k_bmi_write32(ar, hi_mbox_isr_yield_limit, 99);
-       ath10k_bmi_read32(ar, hi_acs_flags, &param);
+       ret = ath10k_bmi_write32(ar, hi_mbox_io_block_sz, 256);
+       if (ret)
+               return ret;
+       ret = ath10k_bmi_write32(ar, hi_mbox_isr_yield_limit, 99);
+       if (ret)
+               return ret;
+       ret = ath10k_bmi_read32(ar, hi_acs_flags, &param);
+       if (ret)
+               return ret;
 
        /* Data transfer is not initiated, when reduced Tx completion
         * is used for SDIO. disable it until fixed
@@ -647,14 +654,22 @@ static void ath10k_init_sdio(struct ath10k *ar)
         */
        param &= ~HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE;
        param |= HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_SET;
-       ath10k_bmi_write32(ar, hi_acs_flags, param);
+       ret = ath10k_bmi_write32(ar, hi_acs_flags, param);
+       if (ret)
+               return ret;
 
        /* Explicitly set fwlog prints to zero as target may turn it on
         * based on scratch registers.
         */
-       ath10k_bmi_read32(ar, hi_option_flag, &param);
+       ret = ath10k_bmi_read32(ar, hi_option_flag, &param);
+       if (ret)
+               return ret;
        param |= HI_OPTION_DISABLE_DBGLOG;
-       ath10k_bmi_write32(ar, hi_option_flag, param);
+       ret = ath10k_bmi_write32(ar, hi_option_flag, param);
+       if (ret)
+               return ret;
+
+       return 0;
 }
 
 static int ath10k_init_configure_target(struct ath10k *ar)
@@ -2500,8 +2515,15 @@ int ath10k_core_start(struct ath10k *ar, enum 
ath10k_firmware_mode mode,
                if (status)
                        goto err;
 
-               if (ar->hif.bus == ATH10K_BUS_SDIO)
-                       ath10k_init_sdio(ar);
+               if (ar->hif.bus == ATH10K_BUS_SDIO) {
+                       status = ath10k_init_sdio(ar);
+                       if (status) {
+                               ath10k_err(ar,
+                                          "could not init HTC (%d)\n",
+                                          status);
+                               goto err;
+                       }
+               }
        }
 
        ar->htc.htc_ops.target_send_suspend_complete =
-- 
2.17.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Reply via email to