+ Ulf to give comments from SDIO point of view Wen Gong <wg...@qti.qualcomm.com> writes:
>> -----Original Message----- >> From: ath10k <ath10k-boun...@lists.infradead.org> On Behalf Of Grant >> Grundler >> Sent: Saturday, May 4, 2019 2:01 AM >> To: Wen Gong <wg...@codeaurora.org> >> Cc: linux-wirel...@vger.kernel.org; ath10k@lists.infradead.org >> Subject: [EXT] Re: [PATCH] ath10k: remove mmc_hw_reset while hif power >> down >> >> [repeating comments I made in the gerrit review for Chrome OS : >> https://chromium- >> review.googlesource.com/c/chromiumos/third_party/kernel/+/1585667 >> ] >> >> On Sat, Apr 27, 2019 at 7:17 PM Wen Gong <wg...@codeaurora.org> wrote: >> > >> > For sdio 3.0 chip, the clock will drop from 200M Hz to 50M Hz after load >> > ath10k driver, it is because mmc_hw_reset will reset the sdio's power, >> > then mmc will consider it as sdio 2.0 and drop the clock. >> >> Wen, >> 5468e784c0600551ca03263f5255a375c05f88e7 commit message gives >> reasons >> for adding the mmc_hw_reset() call. The commit message for removing >> gives different reason for removal. Both are good but second one is >> incomplete. >> >> The commit message for removal should ALSO explain why adding this >> call wasn't necessary in the first place OR move the call to a >> different code path. >> >> > Remove mmc_hw_reset will avoid the drop of clock. >> >> This commit message makes it clear the original patch introduced a new >> problem. But the original patch fixed a different problem and that >> this proposed change seems likely to re-introduce and the commit >> message should explain why that isn't true (or how the original was >> fixed differently) > > The mmc_hw_reset's effect depends on the hardware layout/configure > software's behavior, recently it will effect the clock of sdio for the > platform I used. And it will still work well without mmc_hw_reset for > the platform I Used currently. If sdio cannot work on other platform, > I think it can add flag in ath10k_hw_params_list for the platform to > call the mmc_hw_reset depends on the flag. I don't see how you can use ath10k_hw_params_list to separate SDIO controller functionality, I assume that's the real reason for difference of functionality? Maybe this is a bug on the SDIO controller? Ulf, what do you think? Any suggestions? Full discussion here: https://patchwork.kernel.org/patch/10920563/ -- Kalle Valo _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k