Hi, I am currently working on the 8devices Habanero support for OpenWrt. This AP requires two special BDFs to get the Wi-Fi PHYs working (correctly). The bmi-board-id='s would clash with one of the the IPQ401X AP-DK boards because QCA doesn't provide special IDs for customers and seems to use the AP-DK board-ids in the wifi firmware to change its behavior.
This update improves 5GHz radio.
Now to the questions from the wiki page [1]:
* description for what hardware this is:
- it is a QCA4019 based module
- one QCA4019 radio is used as 2.4GHz radio
- one QCA4019 radio is used as 5GHz radio
* origin of the board file (did you create it yourself or where you
downloaded)
- it was pulled from the 8devices OpenWrt fork
- it is based on latest version
* ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
- QCA4019 hw1.0
+ bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=8devices-Habanero
md5sum:
64d0817da715875483d323f2bb0c898c
+ bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=8devices-Habanero
md5sum:
56202ea33e96f16c65b75d464451c251
* attach the actual board file (board.bin)
- The name of the files are equal to the id string in the board-2.bin
(minus the ".bin")
Kind regards,
Robert Marko
[1] https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles
bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=8devices-Habanero.bin
Description: Binary data
bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=8devices-Habanero.bin
Description: Binary data
_______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
