Dundi Raviteja <du...@codeaurora.org> writes:
> Enable support to configure different beacon interval per VAP.
>
> To support this feature, map different beacon interval service bit
> to wmi tlv service.
>
> Tested HW: WCN3990
> Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1
>
> Signed-off-by: Dundi Raviteja <du...@codeaurora.org>
[...]
> --- a/drivers/net/wireless/ath/ath10k/mac.c
> +++ b/drivers/net/wireless/ath/ath10k/mac.c
> @@ -8232,6 +8232,30 @@ void ath10k_mac_destroy(struct ath10k *ar)
> },
> };
>
> +static struct
> +ieee80211_iface_combination ath10k_tlv_qcs_bcn_int_if_comb[] = {
> + {
> + .limits = ath10k_tlv_if_limit,
> + .num_different_channels = 1,
> + .max_interfaces = 4,
> + .beacon_int_infra_match = true,
> + .beacon_int_min_gcd = 1,
> + .n_limits = ARRAY_SIZE(ath10k_tlv_if_limit),
> + },
> + {
> + .limits = ath10k_tlv_qcs_if_limit,
> + .num_different_channels = 2,
> + .max_interfaces = 4,
> + .n_limits = ARRAY_SIZE(ath10k_tlv_qcs_if_limit),
> + },
> + {
> + .limits = ath10k_tlv_if_limit_ibss,
> + .num_different_channels = 1,
> + .max_interfaces = 2,
> + .n_limits = ARRAY_SIZE(ath10k_tlv_if_limit_ibss),
> + },
> +};
> +
> static const struct ieee80211_iface_limit ath10k_10_4_if_limits[] = {
> {
> .max = 1,
> @@ -8642,6 +8666,15 @@ int ath10k_mac_register(struct ath10k *ar)
> ath10k_tlv_qcs_if_comb;
> ar->hw->wiphy->n_iface_combinations =
> ARRAY_SIZE(ath10k_tlv_qcs_if_comb);
> +
> + if (test_bit
> + (WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
> + ar->wmi.svc_map)) {
> + ar->hw->wiphy->iface_combinations =
> + ath10k_tlv_qcs_bcn_int_if_comb;
> + ar->hw->wiphy->n_iface_combinations =
> + ARRAY_SIZE(ath10k_tlv_qcs_bcn_int_if_comb);
> + }
I don't like using WMI service flags to advertise different interface
combinations, it makes ath10k code convoluted. A much better approach is
to use WMI_SERVICE_IFACE_COMBINATION_SUPPORT:
ath10k:New interface to get interface combinations from FW
https://patchwork.kernel.org/patch/11027361/
--
Kalle Valo
