For legacy mode, tx bitrate not show correct sometimes, for example:
iw wlan0 link
Connected to 8c:21:0a:b3:5a:64 (on wlan0)
        SSID: tplinkgw
        freq: 2462
        RX: 19672 bytes (184 packets)
        TX: 9851 bytes (87 packets)
        signal: -51 dBm
        rx bitrate: 54.0 MBit/s
        tx bitrate: 2.8 MBit/s

This patch use the tx bitrate info from WMI_TLV_PEER_STATS_INFO_EVENTID
report from firmware, and tx bitrate show correct.

iw wlan0 link
Connected to 8c:21:0a:b3:5a:64 (on wlan0)
        SSID: tplinkgw
        freq: 2462
        RX: 13973 bytes (120 packets)
        TX: 6737 bytes (57 packets)
        signal: -52 dBm
        rx bitrate: 54.0 MBit/s
        tx bitrate: 54.0 MBit/s

This patch only effect SDIO chip, ath10k_mac_sta_get_peer_stats_info
has check for bitrate_statistics of hw_params, it is enabled only for
"qca6174 hw3.2 sdio".

Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00042.

Signed-off-by: Wen Gong <wg...@codeaurora.org>
---
 drivers/net/wireless/ath/ath10k/core.h    |  2 ++
 drivers/net/wireless/ath/ath10k/mac.c     | 10 ++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.c |  2 ++
 3 files changed, 14 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/core.h 
b/drivers/net/wireless/ath/ath10k/core.h
index f70b256272ed..1168b70dd2e2 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -524,6 +524,8 @@ struct ath10k_sta {
 
        u32 rx_rate_code;
        u32 rx_bitrate_kbps;
+       u32 tx_rate_code;
+       u32 tx_bitrate_kbps;
        struct work_struct update_wk;
        u64 rx_duration;
        struct ath10k_htt_tx_stats *tx_stats;
diff --git a/drivers/net/wireless/ath/ath10k/mac.c 
b/drivers/net/wireless/ath/ath10k/mac.c
index 4b4c81ef131b..a63f8efb4f71 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -8497,6 +8497,16 @@ static void ath10k_mac_sta_get_peer_stats_info(struct 
ath10k *ar,
                arsta->rx_rate_code = 0;
                arsta->rx_bitrate_kbps = 0;
        }
+
+       if (arsta->tx_rate_code != 0 && arsta->tx_bitrate_kbps != 0) {
+               ath10k_mac_parse_bitrate(ar, arsta->tx_rate_code,
+                                        arsta->tx_bitrate_kbps,
+                                        &sinfo->txrate);
+
+               sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BITRATE);
+               arsta->tx_rate_code = 0;
+               arsta->tx_bitrate_kbps = 0;
+       }
 }
 
 static void ath10k_sta_statistics(struct ieee80211_hw *hw,
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c 
b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index eec1f1f27dec..9187b62b331c 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -249,6 +249,8 @@ static int ath10k_wmi_tlv_parse_peer_stats_info(struct 
ath10k *ar, u16 tag, u16
        arsta = (struct ath10k_sta *)sta->drv_priv;
        arsta->rx_rate_code = __le32_to_cpu(stat->last_rx_rate_code);
        arsta->rx_bitrate_kbps = __le32_to_cpu(stat->last_rx_bitrate_kbps);
+       arsta->tx_rate_code = __le32_to_cpu(stat->last_tx_rate_code);
+       arsta->tx_bitrate_kbps = __le32_to_cpu(stat->last_tx_bitrate_kbps);
 
        return 0;
 }
-- 
2.23.0

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Reply via email to