Hello,
On 2020-09-15 17:02, Hans Geiblinger wrote:
The support for this device is currently being added into OpenWrt. This AP
requires
two special BDFs to get the Wi-Fi PHYs working (correctly).
* description for what hardware this is:
- it is a IPQ4019 based board
- one QCA40xx radio is used as 2.4GHz radio
- one QCA40xx radio is used as 5GHz radio
* origin of the board file (did you create it yourself or where you
downloaded)
- boarddata files were taken from OEM LinksysFW_MR8300_1.1.7.201281_prod.img
* ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
- QCA4019 hw1.0
+bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=linksys-mr8300-v0-fcc
SHA256: 0A8E9DBBD12A87AEDACA743B21756014F80C91FB4D1AB7FF7D1E7F059398522B
+bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=linksys-mr8300-v0-fcc
SHA256: A6DAF207C79BC6E0106ECD5231B5F127A36ED0A1AF5B324C5949CC07DA3CC925
Please use the md5sums:
<https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>
(Initially the checksums were sha256, but the tools already had the md5sum
integrated.
From what I know Kalle uses the checksum just to check that nothing got
corrupted when
importing the mails)
* attach the actual board file (board.bin)
- All eight bin files have been included. For OpenWRT we will be using the
"fcc" variant.
you might as well only post the fcc variants in that case.
- The name of the files are equal to the id string in the board-2.bin
(minus the ".bin")
Cheers,
Christian
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k