Sorry again for the slow response time. I got around to testing this today on my hardware. I tested with a vanilla 5.13.8 kernel, and then the same kernel with this patch applied. Long story short, the patch does indeed seem to at least work around the issue I was seeing in [1]. With this patch applied, I still get the same "failed to copy target iram contents" error, but the interface comes up and seems to be functional regardless.
So, for what it's worth (granted I am no wireless expert!), you can take: Tested-by: Axel Rasmussen <axelrasmus...@google.com> (This issue has nothing to do with my full time job, but I'm meant to use my @google.com address for any open source contributions, which I believe applies to commit messages too.) [1]: https://lists.infradead.org/pipermail/ath10k/2021-May/012626.html Here are the two dmesg outputs, for comparison: # uname -a Linux router 5.13.8 #1 SMP Wed Aug 11 20:18:51 PDT 2021 x86_64 AMD GX-412TC SOC AuthenticAMD GNU/Linux # dmesg | grep ath [ 12.491747] ath10k_pci 0000:04:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 12.613341] ath10k_pci 0000:04:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe [ 12.613367] ath10k_pci 0000:04:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 1 testmode 0 [ 12.615071] ath10k_pci 0000:04:00.0: firmware ver 10.4-3.9.0.2-00131 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps,peer-fixed-rate,iram-recovery crc32 23bd9e43 [ 13.846538] ath10k_pci 0000:04:00.0: board_file api 2 bmi_id 0:31 crc32 85498734 [ 16.428502] ath10k_pci 0000:04:00.0: failed to copy target iram contents: -12 [ 16.518692] ath10k_pci 0000:04:00.0: could not init core (-12) [ 16.518950] ath10k_pci 0000:04:00.0: could not probe fw (-12) # uname -a Linux router 5.13.8+ #2 SMP Wed Aug 11 20:28:56 PDT 2021 x86_64 AMD GX-412TC SOC AuthenticAMD GNU/Linux # dmesg | grep ath [ 12.201239] ath10k_pci 0000:04:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 12.323354] ath10k_pci 0000:04:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe [ 12.323407] ath10k_pci 0000:04:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 1 testmode 0 [ 12.325162] ath10k_pci 0000:04:00.0: firmware ver 10.4-3.9.0.2-00131 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps,peer-fixed-rate,iram-reco very crc32 23bd9e43 [ 13.556748] ath10k_pci 0000:04:00.0: board_file api 2 bmi_id 0:31 crc32 85498734 [ 16.155848] ath10k_pci 0000:04:00.0: No hardware memory [ 16.155873] ath10k_pci 0000:04:00.0: failed to copy target iram contents: -12 [ 16.267376] ath10k_pci 0000:04:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta 512 raw 0 hwcrypto 1 [ 16.382257] ath: EEPROM regdomain sanitized [ 16.382289] ath: EEPROM regdomain: 0x64 [ 16.382306] ath: EEPROM indicates we should expect a direct regpair map [ 16.382312] ath: Country alpha2 being used: 00 [ 16.382316] ath: Regpair used: 0x64 [ 16.393599] ath10k_pci 0000:04:00.0 wlp4s0: renamed from wlan0 [ 41.264025] ath10k_pci 0000:04:00.0: No hardware memory [ 41.264045] ath10k_pci 0000:04:00.0: failed to copy target iram contents: -12 [ 41.480677] ath10k_pci 0000:04:00.0: Unknown eventid: 36933 On Sun, Aug 1, 2021 at 7:23 PM Axel Rasmussen <axel.rasmuss...@gmail.com> wrote: > > On Thu, Jul 22, 2021 at 12:42 PM ojab // <o...@ojab.ru> wrote: > > > > See also: https://lists.infradead.org/pipermail/ath10k/2021-May/012626.html > > > > On Thu, 22 Jul 2021 at 22:36, ojab <o...@ojab.ru> wrote: > > > > > > After reboot with kernel & firmware updates I found `failed to copy > > > target iram contents:` in dmesg and missing wlan interfaces for both > > > of my QCA9984 compex cards. Rolling back kernel/firmware didn't fixed > > > it, so while I have no idea what's actually happening, I don't see why > > > we should fail in this case, looks like some optional firmware ability > > > that could be skipped. > > > > > > Also with additional logging there is > > > ``` > > > [ 6.839858] ath10k_pci 0000:04:00.0: No hardware memory > > > [ 6.841205] ath10k_pci 0000:04:00.0: failed to copy target iram > > > contents: -12 > > > [ 6.873578] ath10k_pci 0000:07:00.0: No hardware memory > > > [ 6.875052] ath10k_pci 0000:07:00.0: failed to copy target iram > > > contents: -12 > > > ``` > > > so exact branch could be seen. > > > > > > Signed-off-by: Slava Kardakov <o...@ojab.ru> > > > --- > > > Of course I forgot to sing off, since I don't use it by default because I > > > hate my real name and kernel requires it > > Thanks for working on this! And sorry for the slow response. I've been > unexpectedly very busy lately, but I plan to test out this patch next > week. > > > > > > > drivers/net/wireless/ath/ath10k/core.c | 9 ++++++--- > > > 1 file changed, 6 insertions(+), 3 deletions(-) > > > > > > diff --git a/drivers/net/wireless/ath/ath10k/core.c > > > b/drivers/net/wireless/ath/ath10k/core.c > > > index 2f9be182fbfb..d9fd5294e142 100644 > > > --- a/drivers/net/wireless/ath/ath10k/core.c > > > +++ b/drivers/net/wireless/ath/ath10k/core.c > > > @@ -2691,8 +2691,10 @@ static int ath10k_core_copy_target_iram(struct > > > ath10k *ar) > > > u32 len, remaining_len; > > > > > > hw_mem = ath10k_coredump_get_mem_layout(ar); > > > - if (!hw_mem) > > > + if (!hw_mem) { > > > + ath10k_warn(ar, "No hardware memory"); > > > return -ENOMEM; > > > + } > > > > > > for (i = 0; i < hw_mem->region_table.size; i++) { > > > tmp = &hw_mem->region_table.regions[i]; > > > @@ -2702,8 +2704,10 @@ static int ath10k_core_copy_target_iram(struct > > > ath10k *ar) > > > } > > > } > > > > > > - if (!mem_region) > > > + if (!mem_region) { > > > + ath10k_warn(ar, "No memory region"); > > > return -ENOMEM; > > > + } > > > > > > for (i = 0; i < ar->wmi.num_mem_chunks; i++) { > > > if (ar->wmi.mem_chunks[i].req_id == > > > @@ -2917,7 +2921,6 @@ int ath10k_core_start(struct ath10k *ar, enum > > > ath10k_firmware_mode mode, > > > if (status) { > > > ath10k_warn(ar, "failed to copy target iram > > > contents: %d", > > > status); > > > - goto err_hif_stop; > > > } > > > } > > > > > > -- > > > 2.32.0 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
