Hi everyone, we tested this patch at Freifunk Aachen using Gluon/OpenWrt.
We had the issue that the Extreme Networks WS-AP3825i did have a high load in a busy environment, making the node unresponsive. This issue is resolved with this patch, improving the wifi stability noticeably, similar to https://patchwork.kernel.org/project/linux-wireless/list/?series=911851 Restarting Wifi (using wifi) still logs kern.warn kernel: [98526.968626] ath10k_warn: 617 callbacks suppressed kern.warn kernel: [98526.968651] ath10k_pci a000:03:00.0: could not get mac80211 beacon kern.warn kernel: [98527.071045] ath10k_pci a000:03:00.0: could not get mac80211 beacon kern.warn kernel: [98532.104123] ath10k_pci a000:03:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0 Just like it was with the other patch. We did also not see any "failed to flush sta" message in dmesg. Thanks, Florian Maurer Tested-by: Florian Maurer <[email protected]> On Wed, 2025-08-06 at 15:00 +0800, Zhi-Jun You wrote: > When a STA is marked as no longer authorized, if the driver doesn't > implement flush_sta(), mac80211 calls ieee80211_flush_queues() to > flush hardware queues to avoid sending unencrypted frames. > > This has became a problem for ath10k because ieee80211_flush_queues() > will stop all traffic and call ath10k_flush, which waits until the > whole HW queue is empty. In a busy environment this will trigger a > timeout warning and stalls other STAs. > > Fix this by implementing flush_sta method using WMI command to flush > frames of a specific STA. > Flushed frames will be marked as discard in tx complete indication. > > ops->flush_sta will be set to NULL if htt.disable_tx_comp is set to > true. > > Tested-on: QCA9984 hw1.0 PCI 10.4-3.9.0.2-00157 > > Signed-off-by: Zhi-Jun You <[email protected]> > --- > drivers/net/wireless/ath/ath10k/mac.c | 18 ++++++++++++++++++ > 1 file changed, 18 insertions(+) > > diff --git a/drivers/net/wireless/ath/ath10k/mac.c > b/drivers/net/wireless/ath/ath10k/mac.c > index 24dd794e31ea..6959f20334a7 100644 > --- a/drivers/net/wireless/ath/ath10k/mac.c > +++ b/drivers/net/wireless/ath/ath10k/mac.c > @@ -8135,6 +8135,20 @@ static void ath10k_flush(struct ieee80211_hw *hw, > struct ieee80211_vif *vif, > mutex_unlock(&ar->conf_mutex); > } > > +static void ath10k_mac_op_flush_sta(struct ieee80211_hw *hw, struct > ieee80211_vif *vif, > + struct ieee80211_sta *sta) > +{ > + struct ath10k_vif *arvif = (void *)vif->drv_priv; > + struct ath10k *ar = hw->priv; > + u32 bitmap = 0xFFFFFFFF; > + int ret = 0; > + > + ret = ath10k_wmi_peer_flush(ar, arvif->vdev_id, sta->addr, bitmap); > + if (ret) > + ath10k_warn(ar, "failed to flush sta (sta %pM)\n", > + sta->addr); > +} > + > /* TODO: Implement this function properly > * For now it is needed to reply to Probe Requests in IBSS mode. > * Probably we need this information from FW. > @@ -9487,6 +9501,7 @@ static const struct ieee80211_ops ath10k_ops = { > .set_rts_threshold = ath10k_set_rts_threshold, > .set_frag_threshold = ath10k_mac_op_set_frag_threshold, > .flush = ath10k_flush, > + .flush_sta = ath10k_mac_op_flush_sta, > .tx_last_beacon = ath10k_tx_last_beacon, > .set_antenna = ath10k_set_antenna, > .get_antenna = ath10k_get_antenna, > @@ -10294,6 +10309,9 @@ int ath10k_mac_register(struct ath10k *ar) > if (!ar->hw_params.hw_ops->set_coverage_class) > ar->ops->set_coverage_class = NULL; > > + if (ar->htt.disable_tx_comp) > + ar->ops->flush_sta = NULL; > + > ret = ath_regd_init(&ar->ath_common.regulatory, ar->hw->wiphy, > ath10k_reg_notifier); > if (ret) {
smime.p7s
Description: S/MIME cryptographic signature
