This reverts commit 51a73f1b2e56b0324b4a3bb8cebc4221b5be4c7a.
Although this commit benefits QCA6174, it breaks QCA988x and
QCA9984 [1][2]. Since it is not likely to root cause/fix this
issue in a short time, revert it to get those chips back.
Compile tested only.
Fixes: 51a73f1b2e56 ("wifi: ath10k: avoid unnecessary wait for service ready
message")
Link:
https://lore.kernel.org/ath10k/[email protected]
# [1]
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220671 # [2]
Signed-off-by: Baochen Qiang <[email protected]>
---
drivers/net/wireless/ath/ath10k/wmi.c | 39 ++++++++++++++++++-----------------
1 file changed, 20 insertions(+), 19 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c
b/drivers/net/wireless/ath/ath10k/wmi.c
index
b3b00d324075bd1b82c76f2d93cf4e2a79ead769..b4aad6604d6d9d95b918d0a077f5d1511bc249ad
100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -1764,32 +1764,33 @@ void ath10k_wmi_put_wmi_channel(struct ath10k *ar,
struct wmi_channel *ch,
int ath10k_wmi_wait_for_service_ready(struct ath10k *ar)
{
- unsigned long timeout = jiffies + WMI_SERVICE_READY_TIMEOUT_HZ;
unsigned long time_left, i;
- /* Sometimes the PCI HIF doesn't receive interrupt
- * for the service ready message even if the buffer
- * was completed. PCIe sniffer shows that it's
- * because the corresponding CE ring doesn't fires
- * it. Workaround here by polling CE rings. Since
- * the message could arrive at any time, continue
- * polling until timeout.
- */
- do {
+ time_left = wait_for_completion_timeout(&ar->wmi.service_ready,
+ WMI_SERVICE_READY_TIMEOUT_HZ);
+ if (!time_left) {
+ /* Sometimes the PCI HIF doesn't receive interrupt
+ * for the service ready message even if the buffer
+ * was completed. PCIe sniffer shows that it's
+ * because the corresponding CE ring doesn't fires
+ * it. Workaround here by polling CE rings once.
+ */
+ ath10k_warn(ar, "failed to receive service ready completion,
polling..\n");
+
for (i = 0; i < CE_COUNT; i++)
ath10k_hif_send_complete_check(ar, i, 1);
- /* The 100 ms granularity is a tradeoff considering scheduler
- * overhead and response latency
- */
time_left = wait_for_completion_timeout(&ar->wmi.service_ready,
- msecs_to_jiffies(100));
- if (time_left)
- return 0;
- } while (time_before(jiffies, timeout));
+
WMI_SERVICE_READY_TIMEOUT_HZ);
+ if (!time_left) {
+ ath10k_warn(ar, "polling timed out\n");
+ return -ETIMEDOUT;
+ }
+
+ ath10k_warn(ar, "service ready completion received, continuing
normally\n");
+ }
- ath10k_warn(ar, "failed to receive service ready completion\n");
- return -ETIMEDOUT;
+ return 0;
}
int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar)
---
base-commit: d5d9da878287cb30199defc6941b695f33f9236b
change-id: 20251024-ath10k-revert-polling-first-change-2add89f0fd15
Best regards,
--
Baochen Qiang <[email protected]>
